Replacing the palm-rest and keyboard
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
Place the palm-rest and keyboard assembly on a flat surface.
Post-requisites
1. Replace the touchpad.
2. Replace the
system
board.
3. Replace the
display
assembly.
4. Replace the
coin-cell
battery.
5. Replace the
heat
sink.
6. Replace the fan.
7. Replace the
power button
8. Replace the
I/O
board.
9. Replace the
wireless
card.
10. Replace the
solid-state
drive.
11. Replace the battery.
12. Replace the speakers.
13. Replace the
base
cover.
58
Replacing the palm-rest and keyboard assembly
computer. After working inside your computer, follow the instructions in
or
power button with fingerprint
reader(if installed).
36
assembly
After
www.dell.com/