Chapter 3: Removing The Base Cover; Procedure - Dell Inspiron 13 5000 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•

Procedure

Procedure
1. Loosen the three captive screws on the base cover.
2. Remove the seven screws (M2.5x4) that secure the base cover to the palm-rest and keyboard assembly.
3. Pry the base cover starting from the top-left corner of the computer base.
4. Lift the base cover off the palm-rest and keyboard assembly.
Removing the base cover
computer. After working inside your computer, follow the instructions in After
www.dell.com/
Removing the base cover
3
11