Maintenance
Replacing the Brush
1.
Remove the 4 capscrews (8 x 60 mm), 8 washers
(8 mm), and 4 locknuts (8 mm) that secure the
groomer brush to the brush-adjustment bracket,
and remove the brush
Figure 20
1. Capscrew (8 x 60 mm)
2. Washer (8 mm)
3. Brush-adjustment bracket
2.
Align the holes in the new groomer brush with
the holes in the brush-adjustment bracket
(Figure
20).
3.
Assemble the brush to the bracket
with the 4 capscrews (8 x 60 mm), 8 washers (8
mm), and 4 locknuts (8 mm) that you removed
in step 1.
4.
Tighten the capscrews and locknuts.
(Figure
20).
g284816
4. Locknut (8 mm)
5. Groomer brush
(Figure
20)
11