Appendix Bbios Update Using An Spi Programmer; Tools Required - Intel Atom C2000 Getting Started Manual

Programmer
This section provides details for programming the Flash memory containing the BIOS on the
Mohon Peak CRB. The following example was performed using a laptop running Windows* 7
Enterprise* installed, using an in-circuit SPI Flash programmer (DediProg* SF600).
Note: Any SPI Flash programmer, computer, and software may be used to program the Flash
memory. The following specific example is presented in order to describe the programming process.
B.1

Tools Required

• Windows* PC with an available USB port
• DediProg* SF600 SPI Flash Programmer
• SO Connection Adapter (old model EM-CON-SO) (current SO8 or SO16,
https://www.dediprog.com/search/website?keyword=EM-PRO-CON-SO
• 1.27 mm, 2x4 Programming Cable, model CB-24-127
https://www.dediprog.com/product/CB-24-127
Note: If you happen to be using an older SF100 programmer instead of the SF600, acquire the
SF100 Universal Adapter, model ISP-UADP-127/254:
( https://www.dediprog.com/product/ISP-UADP-127
80
BIOS Update Using an SPI
BIOS Update Using an SPI Programmer
https://www.dediprog.com/product/SF600
)
)
Getting Started Guide