VTech Toot-Toot Drivers Fix and Fuel Garage Instruction Manual page 14

4. Assemble and attach the sliding track components following the
steps below:
A. Insert the Floor Sign Support to the Floor Sign Plate, and then
insert it to the Sliding Track A, as shown below. Insert the Track
Splitter into Sliding Track B as shown. Make sure you hear a click
sound to confirm the Track Splitter and the Track B are firmly
connected.
B. Connect the Sliding Track C and Sliding Track D together, and
then attach Sliding Track D to the Ground Floor Base, as shown
below. Make sure you hear a click sound to confirm they are firmly
connected.
C. Attach the Sliding Track B to the Sliding Track C, the First Floor
Platform and the Main Support, as shown below. Make sure you
hear a click sound to confirm they are firmly connected.
13