VTech Toot-Toot Drivers Fix and Fuel Garage Instruction Manual page 15

D. Attach the Sliding Tracks A to the Sliding Track B, Main Support
and the Second Floor Platform, as shown below. Make sure you
hear a click sound to confirm they are firmly connected.
5. Assemble and attach the remaining components following the steps
below:
A. Attach the Spinning Plate to the Main Support, as shown below.
Attach the Exit Gate Roof to the Exit Gate Support, as shown
below. Make sure you hear a click sound to confirm they are firmly
connected.
B. Attach the Exit Gate Support, Exit Gate Handrail, Fuel Stop and
Road Sign to the Ground Floor Base, as shown below. Make sure
you hear a click sound to confirm they are firmly connected.
14