VTech Toot-Toot Drivers Fix and Fuel Garage Instruction Manual page 13

C. Attach the First Floor Platform to the Car Wash Supports, Ground
Floor Support and Main Support, as shown below. Make sure you
hear a click sound to confirm they are firmly connected.
3. Assemble and attach the second floor components following the
steps below:
A. Attach the Tuning Station Roof to the Tuning Station Support, as
shown below, then attach the Tuning Station Support and Tuning
Station Plate to the Second Floor Platform as shown. Make sure
you hear a click sound to confirm they are firmly connected.
B. Attach the Second Floor Platform to the First Floor Support
and Main Support, as shown below. Make sure you hear a click
sound to confirm they are firmly connected.
12