VTech Toot-Toot Drivers Fix and Fuel Garage Instruction Manual page 12

C. Attach the Car Wash to the Ground Floor Base, as shown
below. Make sure you hear a click sound to confirm they are
firmly connected.
2. Assemble and attach the first floor components following the
steps below:
A. Attach the Repair Lift and the First Floor Support to the First
Floor Platform, as shown below. Make sure you hear a click sound
to confirm they are firmly connected.
B. Attach the Sliding Track E to the First Floor Platform, as shown
below. Tighten it with two screws to secure.
11