Related Manuals for VTech Toot-Toot Drivers Gold MineTrain Set
Summary of Contents for VTech Toot-Toot Drivers Gold MineTrain Set
- Page 1 User’s Manual Gold Mine Train Set © 2016 VTech All rights reserved Printed in China 91-003240-013...
- Page 3 INTRODUCTION Thank you for purchasing the VTech Toot-Toot Drivers Gold Mine ® ® Train Set! It's a gold rush at the Toot-Toot Drivers Gold Mine Train Set! Turn ® on the motorised freight train and watch as it chugs around the tracks through the tunnels and up hills on its own.
-
Page 4: Included In This Package
INCLUDED IN THIS PACKAGE One flag SmartPoint freight Three shape accessory sorter pieces train with cargo car One mountain One SmartPoint One gate mountain straight track One SmartPoint One SmartPoint Two ramp snap L snap track straight track with gate tracks One SmartPoint One mine... - Page 5 One 90-degree One support One cross snap track track One cross track Eight 1/4 One cross with switch straight tracks track sign Three 90-degree Three 90-degree Three straight tracks, female tracks, male tracks Three SmartPoint straight tracks...
- Page 6 Two 45-degree Two 45-degree Two 1/2 straight tracks, male tracks, female tracks One track One Gate User's manual configuration sheet Two label sheets WARNING: All packing materials, such as tape, plastic sheets, packaging locks and tags are not part of this toy and should be discarded for your child’s safety.
- Page 7 Adult assembly required. For your child’s safety, do not let your child play with the toy until it is fully assembled. Unlock the packaging locks: Rotate the packaging lock anti-clockwise 90 degrees. Pull out the packaging lock. Turn the packaging lock anti-clockwise several times.
-
Page 8: Getting Started
GETTING STARTED BATTERY INSTALLATION – FREIGHT TRAIN 1. Make sure the unit is turned OFF. 2. Locate the battery cover on the rear cabinet of the train. Use a screwdriver to loosen the screw. 3. Install three new AAA (AM-4/ LR03) batteries following the diagram inside the battery box. - Page 9 Disposal of batteries and product The crossed-out wheelie bin symbols on products and batteries, or on their respective packaging, indicates they must not be disposed of in domestic waste as they contain substances that can be damaging to the environment and human health.
-
Page 10: Assembly Instructions
ASSEMbLY INSTRUCTIONS With the VTech Toot-Toot Drivers Gold Mine Train Set, ® ® safety comes first. To ensure your child’s safety, adult assembly is required. 1. Pinch the joint of the cargo car and insert it into the slot on freight... - Page 11 2. Insert the GATE into the slot on the pillar. 3. Tilt the SMARTPOINT MOUNTAIN and insert the MOUNTAIN STRAIGHT TRACK into the slot on the SMARTPOINT MOUNTIAN as shown below. You will hear a “click” sound to indicate that the track is securely attached. 4.
- Page 12 5. Attach the RAMP SNAP TRACK to the L SNAP TRACK as shown below. You will hear a “click” sound to indicate that they are attached securely. 6. Insert the SUPPORT into the slot on the 90-DEGREE SNAP TRACK. Then, attach the 90-DEGREE SNAP TRACK to the L SNAP TRACK as shown below.
- Page 13 8. Insert the MINE SHAFT BASE into the bottom of the MINE SHAFT as shown below. You will hear a “click” sound to indicate the pieces are securely attached. 9. Insert the CROSS TRACK SIGN into the slot on the CROSS TRACK SWITCH as shown below.
- Page 14 EXPAND & EXPLORE To expand the Gold Mine Train Set and inspire creativity, connect to the Toot-Toot Drivers Deluxe Train Track Set ® play set(as shown below). PRODUCT FEATURES – TRAIN 1. OFF/MOTOR SELECTOR SWITCH To turn the train ON, slide the OFF/ MOTOR SELECTOR SWITCH to the MOTOR M O D E ( ) or MANUAL PLAY...
- Page 15 N o t e : This product is in tr y-me mode in the packaging. After opening the package, tur n the vehicle OFF and ON again to proceed with nor mal play. If the unit powers down while playing, we suggest changing the batter ies.
- Page 16 7. While the motor is OFF, if there is no input for about 8 seconds, you will hear a sound and phrase. After another 8 seconds of no input, a song will play. If there is no input for an additional 8 seconds, the unit will play a short tune and then go into sleep mode.
- Page 17 3. Run the train across the MOUNTAIN STRAIGHT TRACK. Once the train pushes through the GATE, it will release the SHAPE SORTER PIECES from the mountain and onto the CARGO CAR. 4. Put any SmartPoint vehicle (each sold separately) on the SmartPoint CARGO CAR to get a lift.
-
Page 18: Troubleshooting
If the problem persists, please call our Consumer Services Department on 01235 546810 (from UK) or +44 1235 546810 (outside UK) and a service representative will be happy to help you. IMPORTANT NOTE: Creating and developing VTech products is accompanied by a ® responsibility that we take very seriously. We make every effort to ensure the accuracy of the information, which forms the value of our products. -
Page 19: Product Registration
VTech Electronics Europe plc (see address below), with proof of purchase, without proof of purchase no replacement will be provided. 3. VTech Electronics Europe plc will examine the product and if it is found to be defective due to faulty materials or workmanship, will replace the product at their discretion. - Page 20 91-003240-013...