Mitsubishi Electric Mr.SLIM PEH Series Technical & Service Manual page 4

Remote controller
Operation buttons
w w button
This switches
continuous operation and
the timer operation.
a a button
Press this button to switch
the cooler electronic dry
(dehumidify) automatic and
heater modes.
i i TEMP button
This sets the room tem-
parature. The temparature
setting can be performed in
1°C units
Setting range
Cooler 19°C to 30°C
Heater 17°C to 28°C
This model name of the
remote controller is indicat-
ed.
4
Once the operation of the unit is
set, subsequent operations can
only be performed by pressing
the ON/OFF button repeately.
q q button
between This sets of switches the
current time. start time and
stop time.
050
k button k
This switches the horizon-
tal fan motion ON and OFF.
(This button does not oper-
ate in this model)
l l button
This sets the ventilation fan
speed.
ON/OFF button
This switches between the
operation and stop modes
each time it is pressed. The
lamp on this butoon lights
during operation.
FILTER
CHECK MODE
TEST RUN
This adjusts the vertical
angle of the ventilation.
(This button does not oper-
ate in this model)
FILTER button
This resets the filter service
indication display.
(This button does not oper-
ate in this model)
CHECK-TEST RUN button
Only press this button to
perform an inspection
check or test operation. Do
not use it for nomal opera-
tion.
button