SOYO Super 7 SY-5EMA+ User's Manual & Technical Reference page 47

BIOS Setup Utility
System Boot Control Settings (continued)
System Boot Setting
Control Settings
Gate A20 Option
Normal
Fast
Memory Parity Enabled
Check/ ECC
Check
Disabled
3-2.4 Typematic Settings
Typematic Setting
Settings
Typematic
Disabled
Rate Setting
Enabled
The following [Typematic Rate] and [Typematic Delay] fields are
active only if [Typematic Rate Setting] is set to [Enabled]
Typematic Rate 6 (Char/sec)
8 (Char/sec)
(Chars/Sec)
10 (Char/sec)
12 (Char/sec)
15 (Char/sec)
20 (Char/sec)
24 (Char/sec)
30 (Char/sec)
Typematic Delay 250 (msec)
500 (msec)
(Msec)
750 (msec)
1000 (msec)
All manuals and user guides at all-guides.com
SY-5EMA+ V1.0
Description
Allows RAM access
above 1MB using the fast
gate A20 line.
This allows to perform a
redundancy check on the
parity bit in the data
strings. This method is
used for error detection
when the parity is not
found.
Description
Enables to adjust the
keystroke repeat rate.
Choose the rate at which
a character is repeated
when holding down a
key.
Choose how long after
you press a key down the
character begins
repeating.
42
Note
Default
Default
Note
Default
Default
Default