Adjusting Fluidix Reflex, Nex, St And Intelli-Jets; Air Controls; Waterfall Control - Sundance Spas ALTAMAR 880 User Manual

11.8

Adjusting Fluidix Reflex, Nex, ST And Intelli-Jets

These jets in your new hot tub offer the advantage of no moving parts
and zero maintenance. They can also be adjusted for a high and low
impact massage, providing the ultimate massage!
To Adjust Jets
1. Fluidix Nex/Intelli-Jets and Reflex Jets only: Turn outer
dial (A) clockwise to increase water volume. Turn outer
dial counterclockwise to decrease water volume or to
shut jet off.
2. For a high impact massage, turn corresponding air
control knob clockwise. For the Fluidix ST jet, this will
create a straight water flow. For low impact massage,
turn corresponding air control knob counterclockwise.
For the Fluidix ST jet, this will create an oscillating flow.
Refer to Sections 11.13-11.24 (pages 35-46) for specific
operation details. The included tool (shown) allows you
to position the jet nozzle angle to your liking. This tool can
also be used to aid in the opening or closing of the nozzle
on Fluidix ST jets.
Note: Always keep at least 6 adjustable jets open at all times
on each jet system.
11.9

Air Controls

Each jet system has its own air control. These controls allow
you to regulate the amount of air which is mixed with the water
entering through the jets. Clockwise rotation adds more air and
counterclockwise rotation reduces air flow.
Note: To minimize heat loss, close all air controls when spa is not in use.
Certain jets may not draw air while either jets pump is running in low
speed; this is considered normal.
11.10

Waterfall Control

Turn waterfall control valve counterclockwise to increase
waterfall(s) output. Turn control valve clockwise to decrease
or turn off waterfall(s) output.
Note: It takes 2 full revolutions to change the waterfall from
a full off to a full on flow rate.
880 SERIES
A
Fluidix Intelli-Jet
A
Fluidix Reflex Jet
Fluidix ST Jet
2x
Full
ON
2x
Full
OFF
Page 33