Table of Contents
Advertisement
All manuals and user guides at all-guides.com
MAINTENANCE
Maintenance
Cleaning the Cabinet
• Use a soft cloth slightly moistened
with a mild detergent solution. Do
not use a solution containing alcohol,
spirits, ammonia or abrasives.
Cleaning Discs
• When a disc
becomes dirty, clean
it with a cleaning
cloth. Wipe the disc
from the center out.
• Do not use solvents
such as benzine,
thinner, commercially available
cleaners, or antistatic spray intended
for analog records.
Cleaning the disc lens
• After prolonged use, dirt or dust may
accumulate at the disc lens. To ensure
good playback quality, clean the disc
lens with Philips CD Lens Cleaner or
any commercially available cleaner.
Follow the instructions supplied with
cleaner.
pg 01-43/D5/37-Eng
41
TROUBLESHOOTING
Warning! Under no
No return to start-up screen
circumstances should you try to
when disc is removed.
repair the set yourself as this will
• Check to see if the program
invalidate the guarantee. Do not
requires another disc to be loaded.
™ Reload a disc.
open the set as there is a risk of
electric shock.
™ Reset by switching the player off, then
on again.
• If a fault occurs, check the points
listed below before taking the system
Player does not respond to all
for repair.
operating commands during
• Should any problems persist after
playback.
you have made these checks, consult
• Operations are not permitted by the
your nearest dealer or service center.
disc.
™ Refer to the instruction of the disc.
DVD-VIDEO Player
No audio at digital output.
Operation
• The digital connections are not
properly connected or connected
Distorted picture or no color
wrongly
with player menu.
™ Check the digital connections.
• The disc format does not match
• Incorrect digital output settings.
your TV's video signal (PAL/NTSC).
™ Check the settings menu to make sure
™ Replace a recommended disc (refer to
the digital output is set to ALL or PCM.
the instruction of this manual).
™ Check if the audio format of the
• The system setting is not correct.
selected audio language matches the
™ Make sure the NTSC/PAL setting at
receiver capabilities.
the player matches the video signal of
your television (see NTSC/PAL setting).
No picture on TV screen.
• Check the disc for fingerprints.
• The video cable is not connected.
™ Clean with a soft cloth, wiping from
™ Connect the cable between the system
center to edge.
and TV.
™ Sometimes a small amount of picture
distortion may appear. This is not
malfunction.
7/13/00, 11:52 AM
41
3139 116 19774
Advertisement
Table of Contents
