Table of Contents
Advertisement
All manuals and user guides at all-guides.com
Playing a DVD
Playing a title
1 After inserting the disc and closing
the tray, playback starts
automatically
™ The status window and the display
show the type of disc loaded, as
well as information about the
disc's contents and playing time.
• The disc may invite you to select an
item from a menu. If the selections
are numbered, press the appropriate
numerical key; if not, use the 1 or 2 /
3 or 4 keys to highlight your
selection, then press OK.
™ The currently playing title and
chapter number are shown in the
menu bar and display.
™ The elapsed playing time is shown
in the status window and the
display.
• If required, you can use the
SURROUND CONTROL (or
SURR on the remote control) key to
select Multichannel, Stereo,
Surround or 3D-Surround. Play may
stop at the end of the Title, and the
player may return to the DVD menu.
To go on to the next title, press 2.
2 To stop play at any other time, press
Ç.
™ The default screen will appear,
giving information about the
current status of the player.
pg 01-43/D5/37-Eng
27
• You can RESUME play from the point
Playing a VCD
at which you stopped play. Press
2 (PLAY) on the remote control;
Playing a disc
when you see the RESUME icon .
1 After inserting the disc and closing
on the screen, press 2 (PLAY) again.
the tray, playback starts
automatically.
™ The RESUME feature applies not
™ The status window and the
only to the disc in the player, but
also to the last four discs you have
played. Simply reload the disc,
press 2 (PLAY) on the remote
control; when you see the
RESUME icon . on the screen ,
• The disc may invite you to select an
press 2 (PLAY) again.
item from a menu. If the selections
are numbered.
Note:
™ The currently playing track
– Since it is usual for DVD movies to be
released at different times in
different regions of the world, all
players have region codes. Discs can
have an optional region code. If you
• If required, you can use the
load a disc of a different region code
SURROUND CONTROL (or
into your player, you will see the region
SURR on the remote control) key to
code notice on the screen. The disc will
select Multichannel, Stereo,
not play and should be removed from
Surround or 3D-Surround.
the player.
2 To stop play at any time, press Ç.
™ The default screen will then
• You can RESUME play from the point
at which you stopped play. Press
2 (PLAY) on the remote control;
when you see the RESUME icon .
on the screen, press 2 (PLAY) again.
™ The RESUME feature applies not
only to the disc in the player, but
also to the last four discs you have
played. Simply reload the disc,
press 2 (PLAY) on the remote
control; when you see the
RESUME icon . on the screen ,
press 2 (PLAY) again.
display show the type of disc
loaded, as well as information
Note:
about the disc's contents and
– When PBC mode is switched on,
playing time.
RESUME play is not available.
General features
Note:
number is shown in the menu bar
– Unless stated otherwise, all operations
and the display. The elapsed
described are based on remote control
playing time is shown in the status
operation. A number of operations can
window and the display.
also be carried out via the menu bar
on the screen. (see 'Menu bar
operation')
Moving to another title/track
When a disc has more than one title or
track (which you can see from both the
menu bar and the display), you can
appear.
move to another title as follows:
1 Select W (TITLE/TRACK) in the
menu bar.
2 Press ë briefly during play to select
the next title/track.
7/13/00, 11:51 AM
DVD-VIDEO
27
3139 116 19774
Advertisement
Table of Contents
