Table of Contents
Advertisement
All manuals and user guides at all-guides.com
MAINTENANCE
Maintenance
Cleaning the Cabinet
• Use a soft cloth slightly moistened with
a mild detergent solution. Do not use a
solution containing alcohol, spirits,
ammonia or abrasives.
Cleaning Discs
• When a disc becomes
dirty, clean it with a
cleaning cloth. Wipe
the disc from the
centre out.
• Do not use solvents
such as benzine,
thinner, commercially available cleaners,
or antistatic spray intended for analogue
records.
Cleaning the disc lens
• After prolonged use, dirt or dust may
accumulate at the disc lens. To ensure
good playback quality, clean the disc
lens with Philips CD Lens Cleaner or any
commercially available cleaner. Follow
the instructions supplied with cleaner.
40
pg 001-41/D5-D1/21-Eng new
40
TROUBLESHOOTING
Warning! Under no circumstances
No return to start-up screen when disc
should you try to repair the set
is removed.
yourself as this will invalidate the
• Check to see if the programme requires
guarantee. Do not open the set as
another disc to be loaded.
™ Reload a disc.
there is a risk of electric shock.
™ Reset by switching the player off, then
• If a fault occurs, check the points listed
on again.
below before taking the system for
repair.
Player does not respond to all
• Should any problems persist after you
operating commands during playback.
have made these checks, consult your
• Operations are not permitted by the
nearest dealer or service centre.
disc.
™ Refer to the instruction of the disc.
DVD-Video Player Operation
No audio at digital output.
• The digital connections are not properly
Distorted picture or no colour with
connected or connected wrongly
player menu.
™ Check the digital connections.
• The disc format does not match your
• Incorrect digital output settings.
TV's video signal (PAL/NTSC).
™ Check the settings menu to make sure
™ Replace a recommended disc (refer to
the digital output is set to ALL or PCM.
the instruction of this manual).
™ Check if the audio format of the
• The system setting is not correct.
selected audio language matches the
™ Make sure the NTSC/PAL setting at the
receiver capabilities.
player matches the video signal of your
television (see NTSC/PAL setting).
No picture on TV screen.
• Check the disc for fingerprints.
• The video cable is not connected.
™ Clean with a soft cloth, wiping from
™ Connect the cable between the system
centre to edge.
and TV.
™ Sometimes a small amount of picture
distortion may appear, this is not
malfunction.
6/8/01, 11:33 AM
3139 115 20054
Advertisement
Table of Contents
