Table of Contents
Advertisement
All manuals and user guides at all-guides.com
DVD-VIDEO
3 Move to Parental Control using the
4 or 3 keys.
4 Move to VALUE ADJUSTMENT (1-
8) using the 2 key.
5 Then use the 4 or 3 keys or the
digit keys (0-9) on the remote
control to select a rating from 1 to 8
for the disc inserted.
Rating 0 (displayed as '– –'):
Parental Control is not activated. The
Disc will be played in full.
Ratings 1 to 8:
The disc contains scenes not suitable
for children. If you set a rating for the
player, all scenes with the same rating
or lower will be played. Higher rated
scenes will not be played unless an
alternative is available on the disc.
The alternative must have the same
rating or a lower one. If no suitable
alternative is found, play will stop and
the 4-digit code has to be entered.
6 Press OK or 1 to confirm, then
press 1 again to exit the menu.
26
pg 01-43/D5/37-Eng
26
Country
4 You can then enter a new code
(twice!) as described above
1 When disc playback is stopped,
(Changing the 4 digit code).
select ACCESS CONTROL in the
Features menu using the 4 or 3
Parental Control Disclaimer
keys.
2 Enter the 4-digit code.
This DVD player features the
3 Move to CHANGE COUNTRY
PARENTAL CONTROL system which
using the 4 key.
is intended to activate when playing
4 Press the 2 key.
DVD discs made with certain software
5 Select a country using 4 or 3.
coding. This is according to technical
6 Press OK or 1 to confirm, then
standards adopted by the set maker
press 1 again to exit the menu.
and disc content industries.
Please note that the PARENTAL
Changing the 4-digit code
CONTROL system will not operate if
1 When disc playback is stopped,
the DVD disc does not have the
select ACCESS CONTROL in the
appropriate software coding. Also note
Features menu using the 4 or 3
that at the time of release of this DVD
keys.
player, certain aspects of the said
2 Enter the old code.
technical standards had not been fully
3 Move to CHANGE CODE using the
settled among the set maker and the
4 key.
disc content industries.
4 Press the 2 key.
On this basis, Philips cannot warrant
5 Enter the new 4-digit code.
6 Enter the code a second time and
functioning of the PARENTAL
reconfirm by pressing OK.
CONTROL system and disclaims any
7 Press 1 to exit the menu.
liability of unintended watching of disc
content.
If you forget your 4 digit code
If in doubt, please check the system
1 Press 9 to exit 'Child Protect' screen.
with the disc before you allow children
2 Select ACCESS CONTROL in the
access or apply to the relevant disc
Features menu using the 3 and 4
publisher for more information.
keys.
3 The 4-digit code can be cancelled by
pressing 9 four times in the 'Access
Control' dialog.
Operation
Loading discs
1 Press OPEN/CLOSE 0 on the
front of the player. The disc tray
opens.
2 Load your chosen disc in the tray,
label side up (also when a double
sided DVD is inserted). Make sure it
is sitting properly in the correct
recess.
3 Gently push the tray, or press
OPEN/CLOSE 0 to close the
tray.
™ "READ" appears in the status
window and on the player display,
and playback starts automatically.
Notes:
– If 'Child Lock' is set to ON and the disc
inserted is not in the 'child safe' list (not
authorized), the 4-digit code must be
entered and/or the disc must be
authorized. (see 'Access Control')
– The DVD tray will open or close only
when the system is in DVD mode.
3139 116 19774
7/13/00, 11:51 AM
Advertisement
Table of Contents
