Table of Contents
Advertisement
All manuals and user guides at all-guides.com
CD
Disc Change
You can change the outer two discs
while the third inner disc is stopped or
is playing.
1 Press DISC CHANGE.
™ The CD carousel tray slides out.
2 Replace the discs in the left and right
disc trays.
• If you wish to change the inner disc
during playback, press DISC
CHANGE again.
™ "DISC CHANGE" will be
displayed.
™ The CD will stop playing.
™ The CD carousel tray will close to
retrieve the inner CD then open
again with the inner CD
accessible.
3 Press OPEN•CLOSE to close the
CD carousel tray.
Selecting a desired track
Selecting a desired track when
playback is stopped
1 Press í or ë (or Digit 0-9 on the
remote control) until the desired track
appears on the display.
2 Press É (PLAY) to start playback.
™ The selected track number and
elapsed playing time appear on
the display.
34
pg 01-43/D5/37-Eng
34
Selecting a desired track during
Programming Tracks
playback
Programming tracks of a loaded CD is
• Press í or ë (or Digit 0-9 on the
possible when playback is stopped. The
remote control) until the desired track
display will indicate the total tracks
appears on the display.
stored in the program. Up to 40 tracks
™ The selected track number and
can be stored in the memory in any
elapsed playing time appear on
order. When 40 tracks are stored and
the display.
you attempt to store another track, the
• If you press í once it will skip to
display will show "PROGRAM FULL".
the beginning of the current track
and play the track again.
1 Load the desired discs in the disc
trays.
Note:
2 Press PROG to start programming.
– Pressing í during shuffling can only
™ The
skip to the beginning of the current
3 Press the CD (CD 1•2•3) or
track.
CD 1/2/3 button to select the disc.
4 Press í or ë (or Digit 0-9 on the
Searching for a particular
remote control) to select the desired
passage during playback
track.
5 Press PROG to store the track.
• Press and hold à or á until the
• Repeat steps 3 to 5 to store other
desired passage is located.
discs and tracks.
™ The volume will be reduced.
6 Press Ç once to end programming.
• Play returns to normal when à or
™ The total number of tracks
á is released.
Notes:
– If the total playing time is more than
" 99:59 " or if one of the programmed
tracks has a number greater than 30,
then " --:-- " appears on the display
instead of the total playing time.
– If the system is reading the disc,
programming is not possible,
"READING" will be displayed and
followed by "DISC X" "X" is the
current read disc number.
– During programming, if no button is
pressed within 20 seconds, the system
will exit program mode automatically.
Reviewing the program
Reviewing of the program is possible
only when playback is stopped.
1 Press í or ë repeatedly to review
starts flashing.
PROG
the programmed tracks.
2 Press Ç once to exit review mode.
Playing the program
1 PressÉ (PLAY) to start program
playback.
™ "PLAY PROGRAM" will be
displayed.
™ The track number and elapsed
playing time of the current track
programmed and total playing
will appear on the display.
time appear on the display.
• If you press REPEAT during
program playback, the current track
or all programmed tracks will be
played repeatedly.
™ "TRACK" or "PROGRAM" will be
displayed.
™ The
the display.
2 Press Ç to stop program playback.
7/13/00, 11:51 AM
and
appear on
REPEAT
PROG
3139 116 19774
Advertisement
Table of Contents
