Clock; Timer - Philips FW-D5 Manual

All manuals and user guides at all-guides.com

CLOCK

DVD MINI HIFI SYSTEM
STANDBY
ON
FTS TITLE CHAP. CHAP. FM LW A M W
P1 P2 P3 P4
POWER SAVE
IR SENSOR
VCD • CD CD 1 • 2 • 3
DVD CD
SEARCH•TUNING STOP•CLEAR
PROG DIM CLOCK/

TIMER

DVD
DVD
AXIS OK
MENU
DVD JOG
View Clock
You can view the clock (if it is set) if the
system is in Standby mode or when any
sound source is selected (CD, TUNER,
etc.). The clock will be displayed for
about seven seconds.
• Press CLOCK/TIMER briefly.
™ "PM 10:38 or 22:38" (the
current time) will be displayed
depending on whether you have
selected 12- or 24-hour mode.
™ "--:--" will be displayed if the
clock is not set.
Note:
– When the system goes into low power
standby mode, the clock setting will not
be displayed.
38
pg 01-43/D5/37-Eng 38
5 Press CLOCK/TIMER again to
NEWS / T.A.
LEFT CENTER RIGHT
SLEEP DIM TIMER
• To exit without storing the setting,
P5 P6
SURR CHANNEL SURR
RDS / CD TEXT
SURROUND CONTROL
5.1CH / STEREO / SURR / 3D
Notes:
FM•AM CDR
TUNER AUX – During clock setting, if no button is
PRESET
PLAY PAUSE PREV SIDE NEXT
VOLUME
– When a power interruption occurs, the
SOUND JOG
Clock Setting
The clock can be set in either 12- or
24-hour mode, e.g. "AM 12:00" or
"00:00". Before setting the clock, you
must be in the View Clock mode.
1 Press CLOCK/TIMER to select
clock mode.
2 Press PROG (on the system only) to
select 12- and 24- hour mode.
™ If 12-hour mode is selected,
"AM 12:00" starts flashing.
™ If 24-hour mode is selected,
"00:00" starts flashing.
3 Set the hour with à or á on the
system.
4 Set the minute with í or ë on
the system.
TIMER
Timer Setting
store the setting.
• The system can switch on to CD or
™ The clock starts.
TUNER mode automatically at a
preset time. It can serve as an alarm
press Ç on the system.
to wake you up.
• Before setting the timer, make sure
the clock is set correctly.
pressed within 90 seconds, the system
• The timer will always be switched on
will exit clock setting mode
once it is set.
automatically.
• The volume of the timer will
increase from the minimum
clock setting is erased.
level until the volume level
before the set is switched to
standby mode.
1 Press and hold CLOCK/TIMER for
more than two seconds to select
timer mode.
™ "AM 12:00" or "00:00" or the
last timer setting starts flashing
depending on whether you have
selected 12- or 24-hour mode.
™ The
™ The selected source is lit while
other available sources are
flashing.
2 Press CD or TUNER to select the
desired source.
• Before selecting CD, make sure a CD
is loaded in the CD tray.
3 Press à or á on the system to
set the hour for the timer to start.
4 Press í or ë on the system to set
the minute for the timer to start.
7/13/00, 11:52 AM
starts flashing.
TIMER
3139 116 19774