Remington MB4030 Manual page 3

ENGLISH
FHOW TO USE
,Before you begin
,Adjusting the trim length
the wheel to the desired setting.
appear on the length position indicator.
SETTING HAIR DESCRIPTION
1
Stubble or Cropped look
2
3
Short
4
5
Medium
6
7
8
9
Long
,0.5 – 5.5mm guide comb
simply by turning the wheel to the desired setting. Turn the wheel clockwise for longer
length and anticlockwise for shorter length.
The setting will appear on the length position indicator.
,Attaching and removing the 0.5 – 5.5mm guide
With the trimmer blade facing away from you, slide the guide comb on top of the trimmer
blade and click into position.
With the trimmer blade facing away from you, carefully push the guide comb away from the
trimmer blade.
4
HAIR LENGTH
1.5mm 0.06''
2.5mm 0.1''
4mm
0.16''
5.5mm 0.22''
7mm
0.28''
9mm
0.35''
11mm
0.43''
14mm
0.55''
18mm
0.71''
comb.
ENGLISH
Note: Trimmer comb must be attached to the product in order to use the hair length
selector.
,To thin and taper beards/ moustaches
with the maximum trimming length setting
comb against the skin
pull of the comb and brush/rinse of
,To deine the beard/moustache line
Hold trimmer with 30mm Trimmer Blade facing you.
facial area and away from beard in neck area.
C BLADE RELEASE
cartridge match up with slots in the housings.
C REPLACING THE TRIMMER COMB
turning. Ensure that the length position indicator is at 1.
Note: The trimmer comb attachment can only be placed on the trimmer one way; if it
ETips for best results
grows.
trimming the nape of your neck, trimming your beard line on front of neck.
5