Declaration Of Conformity - Mercedes-Benz A-Class Owner's Manual

Remove trapped plants or other flam‐
#
mable material, in particular.
If there is damage, consult a qualified
#
specialist workshop immediately.
* NOTE Damage to the vehicle
In the following situations, in particular, there
is a risk of damage to the vehicle:
the vehicle becomes grounded, e.g. on a
R
high kerb or an unpaved road
the vehicle is driven too fast over an
R
obstacle, e.g. a kerb, speed bump or pot‐
hole
a heavy object strikes the underbody or
R
chassis components
In situations such as this, the body, the
underbody, chassis components, wheels or
tyres could be damaged without the damage
being visible. Components damaged in this
way can unexpectedly fail or, in the case of
an accident, may not absorb the loads that
arise as intended.
If the underbody panelling is damaged, flam‐
mable materials such as leaves, grass or
twigs can collect between the underbody and
the underbody panelling. These materials
may ignite if they come into contact with hot
parts on the exhaust system.
Have the vehicle checked and repaired
#
immediately at a qualified specialist
workshop.
or
If driving safety is impaired while con‐
#
tinuing your journey, pull over and stop
the vehicle immediately in accordance
with the traffic conditions, and contact
a qualified specialist workshop.

Declaration of Conformity

Electromagnetic compatibility
The electromagnetic compatibility of the vehicle
components has been checked and certified
according to the currently valid version of Regu‐
lation UN R10.
General notes
Wireless vehicle components
The following information applies to all compo‐
nents of the vehicle and the information systems
and communication devices integrated into the
vehicle which receive and/or transmit radio
waves:
The components of this vehicle that receive
and/or transmit radio waves are compliant with
the basic requirements and all other relevant
conditions of Directive 2014/53/EU. You can
obtain further information from a Mercedes-Benz
Service Centre.
Jack
Copy and translation of the original declaration
of conformity:
EC declaration of conformity
1.
The signatory, as a representative
Manufacturer:
BRANO a.s.
74741 Hradec nad Moravicí, Opavská 1000,
21