Mercedes-Benz A-Class Owner's Manual page 129

126 Light and sight
Adaptive Highbeam Assist Plus switches auto‐
matically between:
Low beam
R
Partial high beam
R
High beam
R
Partial high beam uses the main beam to shine
past other road users rather than dazzling them.
The vehicle in front is illuminated by the dipped
beam.
At speeds above 30 km/h:
If no other road users are detected, the high
R
beam will be switched on automatically.
If other road users are detected, the partial
R
high beam will be switched on automatically.
At speeds below 25 km/h or when there is suffi‐
cient street lighting:
The high beam will switch off automatically.
R
The partial high beam will switch off auto‐
R
matically.
The system's optical sensor is located behind
the windscreen near the overhead control panel.
Switching Adaptive Highbeam Assist Plus
on/off
To switch on: turn the light switch to the
#
à position.
Switch on the main beam using the combina‐
#
tion switch.
When the main beam is switched on auto‐
matically in the dark, the _ indicator
lamp on the multifunction display comes on.
To switch off: switch off the main beam
#
using the combination switch.
Setting the exterior lighting switch-off delay
time
Requirements:
The light switch is in the à position.
R
Multimedia system:
© Settings Lights
, . .
light. del. shut-off
The exterior lighting is activated for the config‐
ured time when the vehicle is parked.
Set the switch-off delay time.
#
Ext.
.