Table of Contents
Advertisement
& WARNING Risk of accident or injury due
to incorrect modifications on electronic
component parts
Modification to electronic components, their
software or wiring could impair their function
and/or the function of other networked com‐
ponent parts. In particular, systems relevant
to safety could also be affected.
As a result, these may no longer function
properly and/or jeopardize the operating
safety of the vehicle.
Never tamper with the wiring and elec‐
#
tronic component parts or their soft‐
ware.
You should have all work on electrical
#
and electronic components carried out
at a qualified specialist workshop.
* NOTE Damage to the vehicle
Damage to the vehicle may occur in the fol‐
lowing cases:
The vehicle becomes grounded, e.g. on a
R
high curb or an unpaved road.
The vehicle is driven too fast over an
R
obstacle, e.g. a curb, speed bump or pot‐
hole.
A heavy object strikes the underbody or
R
parts of the chassis.
In situations such as this, the body, the
underbody, chassis parts, wheels or tires
could be damaged without the damage being
visible. Components damaged in this way
can unexpectedly fail or, in the case of an
accident, no longer withstand the strain they
are designed to.
If the underbody paneling is damaged, flam‐
mable materials such as leaves, grass or
twigs can gather between the underbody and
the underbody paneling. If these materials
come into contact with hot parts on the
exhaust system, they may catch fire.
General notes
Have the vehicle checked and repaired
#
immediately at a qualified specialist
workshop.
or
If driving safety is impaired while con‐
#
tinuing your journey, pull over and stop
the vehicle immediately, paying atten‐
tion to road and traffic conditions, and
contact a qualified specialist workshop.
Declaration of conformity for wireless vehi‐
cle components
USA: "The wireless devices of this vehicle com‐
ply with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: 1) These
devices may not cause harmful interference, and
2) These devices must accept any interference
received, including interference that may cause
undesired operation. Changes or modifications
not expressly approved by the party responsible
for compliance could void the user's authority to
operate the equipment."
19
Advertisement
Table of Contents
