Table of Contents
Advertisement
im Vertrieb von
Using the Menu System
The RGB 302/304 control menus are accessed
through the Front Panel (refer to Chapter 1, "Using the
Front Panel" ). Use the LCD display, together with
front panel keys (see below), to view or make
changes to the current settings. Observe the monitor
or projector screen while making adjustments. The
menu flowchart on page 3-1 may be used as a guide
while stepping through the menus.
MBC
POWER
____ When using the front panel, a pause (time-out) of
approximately 8 seconds will release the current menu
mode and the RGB 302/304 returns to the 3-menu
default cycle and saves any changes. If the user
powers off the RGB 302/304 before returning to the
default cycle (either by a time-out or Exit Menu), any
new changes will not be saved.
below), stop when the proper adjustment has been
reached and allow the time-out to occur to save the new
settings.
The menu system, as illustrated in the previous menu
flowchart, consists of four major classes of menus:
Default Cycle menus, Image Controls menus, Sync
Controls menus, and Option Controls menus. These
menus are discussed in detail later in this chapter.
Pressing the Menu key (
next class of menus as indicated in the flowchart. The
Next key (
or to return to the beginning of the menu class, while
the cursor keys (
change or select the settings. There are also special
keys and key combinations, known as "hot keys",
which are discussed later in this chapter.
www.camboard.de
Extron RGB 302/304 Universal Interface • User's Manual
CAMBOARD Electronics
AUDIO IN
ANALOG/ECL
INPUT
When making adjustments using the cursor keys (see
) is used to step through the submenus
NEXT
Tel. 07131 911201
ce-info@camboard.de
Fax 07131 911203
Chapter 3 • Front Panel Menus
MENU
NEXT
RGB 304
MENU
NEXT
) will advance you to the
MENU
) are used to
RGB 302
Page 3-2
Advertisement
Table of Contents
