Biasi M300V.2025 SM User Manual And Installation Instructions page 66

Fig. 8.10
• Scroll through the various menus by
pressing the keys 13 (back) or 15 (for-
ward), until PAr (Parameters menu) ap-
pears on the LCD display (Fig. 8.11).
• Press the 14 key for 1 second to enter the
selected menu.
Fig. 8.11
• Scroll through the various parameters by
pressing the keys 13 (back) or 15 (for-
ward), until P14, which alternates with the
parameter value, appears on the LCD dis-
play (Fig. 8.12).
Fig. 8.12
• Press the 14 key for 1 second (Fig. 8.9) to
enter the selected parameter. The display
will show the following (Fig. 8.13).
- 66 -
ADVANCED COMMISSIONING
Fig. 8.13
• Pressing the 13 or 15 keys, it is possi-
ble to change the value of parameter 14
from a minimum of 00 to a maximum of
60 based on the selected curve of the K
coefficient in Fig. 8.8 (the value shown on
the display, in Fig. 8.14, corresponds to K
= 1.5).
Fig. 8.14
• Press button 14 (Fig. 8.9) to confirm the
value entered. The display will show the
following (Fig. 8.15) for 5 seconds, then
move up to the next level.
Fig. 8.15