Advertisement
2019/01/30 02:46:26 (GMT+09:00)
6.3.5 EWBS (for PH-ISDB Only)
6.3.5 EWBS – TV unable to output audible tone /wakeup during standby after received EWBS signal– General Checking
Start
Connection Failed
NG: Wrong region
setting
Check region setting
OK
NG: EWBS is OFF
EWBS UI: ON
OK
NG: TV NOT store any Digital ISDB-T channel
Does TV store
any Digital ISDB-T
channel
OK
NG: Part missing
Check mount
Part at EWBS line
R546,R5126,D6008
Still NG
Problem solved?
(Please refer page Assemble and Dissemble Tuner Module)
OK
Done (End)
TV does not triggered due to region
miss matched. Please use correct Main board
and confirm correct region "PH_ISDB".
EWBS Feature is not enable
during standby. Please turn ON EWBS setting.
Refer to
6.3.1 No Picture Tuner
Trouble shooting flow
Replace Main board
Change Tuner Module
57
SYS SET
Advertisement
