2019/01/30 02:46:26 (GMT+09:00)
1-8. FFC REPLACEMENT CAUTION
< Application >
< Connector location >
< Method >
< Caution >
Initial condition
1
Press the release lock button downward (highlighted in red).
Pull FFC in straight direction while pressing release lock
2
button at the same time.
Withdrawal of FFC using Non-ZIF (Yamaichi connector)
Main board side
See as follows
See as follows
Step 1
1
PRESS
Note: FFC as in image is only for reference purpose. Actual FFC
outlook may vary by each vendor.
Step 2
1
2
2
PULL
14
SYS SET