Download
Share
Print this page
Sony KDL-43W6 G Series Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. LCD TV
  5. KDL-43W6 G Series
  6. Service manual

Sony KDL-43W6 G Series Service Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
2019/01/30 02:46:26 (GMT+09:00)
SERVICE MANUAL (COMMON)
ORIGINAL MANUAL ISSUE DATE: 2019.01
(See next page for revision )
Conditions of Use:
(1) Please use this information only for the purpose of performing repair, maintenance and/or configuration services of the Sony products
(hereinafter the "Repair services") under the service agreement entered into with the Sony group company (hereinafter the "Service
agreement"). Using this information for any purpose other than the purpose described foregoing is forbidden.
(2) Only the Authorized Servicer's officers, employees or subcontractors (including their officers and employees) whose duties justify a need-to-
know and who have agreed to hold confidential this information (collectively hereinafter the "Permitted users") are permitted to access and
use this information. To disclose or disseminate to any person other than the Permitted users is forbidden.
(3) Destroy or erase any and all portion of this information promptly in an irrecoverable and secure fashion after achieving the purpose
described in Section (1) above.
(4) Do not copy, replicate, reproduce, alter, translate, transmit, sell, lease, or distribute this information in whole or in part without the prior
written permission of the author.
(Notwithstanding foregoing, it is permitted to copy and distribute this information to the Permitted users.)
(5) Please notify immediately any leakage, loss, theft, misappropriation, or other misuse of this information by e-mail to the following address:
somk-gcs-tissnexim-adm@jp.sony.com
(6) In addition to the above, the terms and conditions of the Service agreement shall be applied to using this information.
Revision of Information:
This information may be changed or updated at any time without any prior notice. Please confirm that this information is up-to-date before
using it.
GN5UN CHASSIS
Segment : SV
9-888-763-01
LCD TV
Sony EMCS (M) Sdn. Bhd., SVPM
© 2019.01
SYS SET

Advertisement

loading

Related Manuals for Sony KDL-43W6 G Series

Summary of Contents for Sony KDL-43W6 G Series

  • Page 1 Conditions of Use: (1) Please use this information only for the purpose of performing repair, maintenance and/or configuration services of the Sony products (hereinafter the “Repair services”) under the service agreement entered into with the Sony group company (hereinafter the “Service agreement”).
  • Page 2 2019/01/30 02:46:26 (GMT+09:00) REVISION HISTORY Version Date Subject 2019.01 1. 1 Issue SYS SET...
  • Page 3 2019/01/30 02:46:26 (GMT+09:00) MODEL LIST THIS SERVICE MANUAL CONTAINS COMMON INFORMATION FOR BELOW REGIONS AND MODELS: REGION ASIA EUROPE MODEL KDL-43W6*G KDL-50W6*G KDL-43WG6* KDL-50WG6* SYS SET...

  • Page 4: Table Of Contents

    2019/01/30 02:46:26 (GMT+09:00) TABLE OF CONTENTS Section Title Page 1. SAFETY NOTES 2. SELF DIAGNOSTIC FUNCTION 3. TROUBLE SHOOTING 4. SERVICE ADJUSTMENTS 5. DIAGRAMS Please refer Service Manual – Unique for below information : -Dissassy and Removal Caution -Wire Dressing -Circuit Board Location -Exploded Views and Parts List Note: Pictures provided in this manual may have difference from actual sets.
  • Page 5 7) Always clean the LCD panel with a soft cloth material. Sony. Circuit adjustments that are critical for safe operation are identified in this manual. Follow these procedures whenever critical components are 8) Use care when handling the wires or connectors of the inverter circuit.
  • Page 6 2019/01/30 02:46:26 (GMT+09:00) 10) During the repair, DO NOT leave the Power On or Burn-in period for *Do not recommend power-on in the conditions which laid face down the more than 1 hour while the TV is face down on a cloth. Refer Figure 1 . panel, in repair activity.
  • Page 7 2019/01/30 02:46:26 (GMT+09:00) To reduce the risk of image retention: Other feature •Fill the screen by changing [Wide mode] to eliminate the black bars. The screen brightness is automatically reduced when displaying still Select [Wide mode] other than [Normal]. images, clocks, bright colours or logos etc. •Turn off the OSD (On Screen Display) by pressing the DISPLAY button, and turn off the menus from connected equipment.
  • Page 8 2019/01/30 02:46:26 (GMT+09:00) ※Things to prepare in advance 1) Caution for Board handling(Stress) Be sure to observe the following contents. ESD wrist-strap ① Hold the board with both hands ESD cushion/sheet ② Do not hold/push Heat-Sink Please use a bag containing the board or a special seat ③...
  • Page 9 2019/01/30 02:46:26 (GMT+09:00) ④Regardless of Good board or Defective board, always put it ⑦Do not hold Heat-Sink when take out or install it.. on ESD cushion/sheet slowly. ⑤Do not stack up 2) Caution for Board handling(ESD) Be sure to observe the following contents. ①When take off Rear-Cover, ②Use ESD wrist-strap do not touch to board...
  • Page 10 2019/01/30 02:46:26 (GMT+09:00) ※Installation example of wrist-strap ③When holding board, do not hit/touch to Plastic part(s) Please connect the clip to the metal part of the chassis of the TV with the wristband grounded. Below is a grounding example of each model. ＜K*-55/65A9F＞...
  • Page 11 2019/01/30 02:46:26 (GMT+09:00) 1-4. Caution About the Lithium Battery 1-6. Leakage Test 1)Danger of explosion if battery is incorrectly replaced. Replace only with (To protect electric shock when customer touch the terminal.) the same or equivalent type. Leakage current can be measured by V: Voltmeter or oscilloscope 2) Outer case broken battery should not contact to water.
  • Page 12 2019/01/30 02:46:26 (GMT+09:00) 1-7. How to Find a Good Earth Ground The servicing of these boards requires special precautions. It is 1)A cold-water pipe is a guaranteed earth ground; the cover-plate strongly recommended to use Lead Free Solder material in order to retaining screw on most AC outlet boxes is also at earth ground.
  • Page 13 2019/01/30 02:46:26 (GMT+09:00) 1-8. FFC REPLACEMENT CAUTION < Application > Withdrawal of FFC using Non-ZIF (IPEX connector) < Connector location > Main board side < Method > See as follows < Caution > See as follows Initial condition Step 1 Step 2 PRESS PRESS PULL...
  • Page 14 2019/01/30 02:46:26 (GMT+09:00) 1-8. FFC REPLACEMENT CAUTION < Application > Withdrawal of FFC using Non-ZIF (Yamaichi connector) < Connector location > Main board side < Method > See as follows < Caution > See as follows Step 1 Step 2 Initial condition PRESS PULL Press the release lock button downward (highlighted in red).
  • Page 15 2019/01/30 02:46:26 (GMT+09:00) 1-8. FFC REPLACEMENT CAUTION < Application > Withdrawal of FFC using Non-ZIF (Molex connector) < Connector location > Main board side < Method > See as follows < Caution > See as follows Initial condition Step 1 & 2 Caution Ensure fingers does NOT touch parts on board and tuner connector...
  • Page 16 2019/01/30 02:46:26 (GMT+09:00) 1-8. FFC REPLACEMENT CAUTION Withdrawal of 51P FFC using ZIF from panel side < Application > (Yeonho 05008R-H51G5(G) OR UJU PF050-051B- C20-C) < Connector location > Panel side < Method > See as follows < Caution > See as follows Initial condition Step 1 Step 2...
  • Page 17 2019/01/30 02:46:26 (GMT+09:00) 1-8. FFC REPLACEMENT CAUTION Withdrawal of 40P FFC using ZIF from board side < Application > (main board & sub board) < Connector location > Main board side & sub board side < Method > See as follows < Caution > See as follows Step 2 Step 1...

  • Page 18: Self Diagnostic Function

    2019/01/30 02:46:26 (GMT+09:00) SECTION 2 SELF DIAGNOSTIC FUNCTION The units in this manual contain a self-diagnostic function. If an error occurs, the Smart Core Red LED will automatically begin to flash. The number of times the LED flashes translates to a probable source of the problem. A definition of the Smart Core Red LED flash indicators is listed in the instruction manual for the user’s knowledge and reference.
  • Page 19 2019/01/30 02:46:26 (GMT+09:00) Failure LED Display The Number of Standby LED Error Detection Error Location (RED blinking) Main Power Error AC Adaptor Main Board or Sub Board Audio Error (LKP) Panel Power Error Main Board Panel I2C Comm Error Main Board or Source Board Main Board or Sub Board Backlight Error (LKP)

  • Page 20: Troubleshooting

    2019/01/30 02:46:26 (GMT+09:00) SECTION 3 TROUBLESHOOTING Triage Chart Before you make the service call… CHASSIS: SV 43/50 1. Confirm the symptom from the customer. 2. Select that symptom from the chart. 3. Bring all the boards and cables listed for that symptom. 4.
  • Page 21 2019/01/30 02:46:26 (GMT+09:00) 1.0 : 2x Blinking – Main Power Error LKP1 and LKP2 Board Adaptor LKP-Board Take out adaptor Check DC voltage at 2 times and check the output voltage. Change Q6020/ *Q6022 Blinking 18V – 22.5V? Adaptor 18V – 22.5V? (Refer Figure 1) Typical: 19.5V Typical: 19.5V...
  • Page 22 2019/01/30 02:46:26 (GMT+09:00) 1.0 : 2x Blinking – Main Power Error LKP1 and LKP2 Board (Checking point) Board Name Board PWB (A side) Detail LKP1 (Q6020) Q6020 19.5V LKP2 (Q6020 & Q6022) 19.5V Q6020 & Q6022 SYS SET...
  • Page 23 2019/01/30 02:46:26 (GMT+09:00) 2.0 : 3x Blinking – Audio Error Important Note : TV must be power OFF condition before plug or unplug any of LKP Board the FFC/FPC/wire/cable from the board. -> This is to prevent START possibility circuit damage happen. 3x blinking FFC not insert correctly Check FFC correct insert?
  • Page 24 2019/01/30 02:46:26 (GMT+09:00) 2.0 : 3x Blinking – Audio Error Important Note : TV must be power OFF condition before plug or unplug any of LKP Board the FFC/FPC/wire/cable from the board. -> This is to prevent (#Audio IC (IC4001) problem) possibility circuit damage happen. START #Audio IC (IC4001) problem 3x blinking and F4001 OK...
  • Page 25 2019/01/30 02:46:26 (GMT+09:00) 2.0 : 3x Blinking – Audio Error Important Note : TV must be power OFF condition before plug or unplug any of LKP1/2 Board (FFC insertion) the FFC/FPC/wire/cable from the board. -> This is to prevent Same apply to B-board FFC connector side possibility circuit damage happen.
  • Page 26 2019/01/30 02:46:26 (GMT+09:00) 2.0 : 3x Blinking – Audio Error BPA Board (Checking Point) Board BPA (Non EU) Details side) Checking Audio Error pin not short to GND Details CN9601 Audio Error Main IC (IC5000) SYS SET...
  • Page 27 2019/01/30 02:46:26 (GMT+09:00) 2.0 : 3x Blinking – Audio Error BPE Board (Checking Point) Board BPE (EU) Details side) Checking Audio Error pin not short to GND Details CN9601 Audio Error pin Main IC (IC5000) SYS SET...
  • Page 28 2019/01/30 02:46:26 (GMT+09:00) 2.0 : 3x Blinking – Audio Error LKP1 Board (Checking Point) Board LKP1 (43”) Details (A side) Purpose : Checking Audio Error Details pin not Zener Diode short to Checking fuse condition Audio Error pin Change Audio IC if need Audio IC each pin...
  • Page 29 2019/01/30 02:46:26 (GMT+09:00) 2.0 : 3x Blinking – Audio Error LKP2 Board (Checking Point) Board LKP2 (50”) Details side) Purpose : Checking Zener Audio Diode Error pin Details not short to GND Audio Error pin Checking fuse condition Change Audio IC if need Audio IC each pin...
  • Page 30 2019/01/30 02:46:26 (GMT+09:00) 3.0 : 4x Blinking – Panel Power Error BPA & BPE Board TV was in standby Start TV turn on TV turn on Replace Main Normally? Normally IC / B-Board RC ON Check PANEL_PWR 3.00V-3.33V? Check voltage at +12V_PANEL is the voltage 11V-12.82V? SYS SET...
  • Page 31 2019/01/30 02:46:26 (GMT+09:00) 3.0 : 4x Blinking – Panel Power Error BPA layout PANEL_PWR +12V_PANEL line SYS SET...
  • Page 32 2019/01/30 02:46:26 (GMT+09:00) 3.0 : 4x Blinking – Panel Power Error BPE layout Q6001 +12V_PANEL line PANEL_PWR SYS SET...
  • Page 33 2019/01/30 02:46:26 (GMT+09:00) 4.0 : 5x Blinking – Panel I2C Error BPA & BPE Board (General Checking) Replace B-Board START TV set is OK now 5 Times Blinking happen? NG Symptom: Reinsert LVDS Flat B-Board Issue NG Flexible Cable (FFC) at B-Board and Panel Side.
  • Page 34 2019/01/30 02:46:26 (GMT+09:00) 5.0 : 6x Blinking – Backlight Error LKP1 & LKP2 Board (Troubleshooting Guide) 6X Blinking Check if LED Connect/Change LED Check BL_ERR CN9901 harness, harness (CN9000) is LED harness loose pin #36 through via hole. connected properly? AC ON 6x Blinking Voltage <3.0V Check BL_VCC01 &...
  • Page 35 2019/01/30 02:46:26 (GMT+09:00) 5.0 : 6x Blinking – Backlight Error LKP1 Board (Checking Point) CN9001 F9000 F9002 BL_ER CN9000 BL_VCC SYS SET...
  • Page 36 2019/01/30 02:46:26 (GMT+09:00) 5.0 : 6x Blinking – Backlight Error LKP2 Board (Checking Point) CN9000 CN9001 BL_VCC0 BL_VCC0 BL_ERR F904 F9001 F9002 SYS SET...
  • Page 37 2019/01/30 02:46:26 (GMT+09:00) 6.1 Screen Blank, No Backlight Screen Blank, No Backlight - General Checking Screen Blank, No backlight Change R9019/*R9021 & *R9365 Check R9019/*R9021 & *R9365 R9019/*R9021 & *R9365 AC ON screen blank, No backlight? broken R >9Ω and <11Ω? Check REG9V (AC ON) Change IC9000 &...
  • Page 38 2019/01/30 02:46:26 (GMT+09:00) 6.1 Screen Blank, No Backlight Screen Blank, No Backlight – Checking Point LKP1 REG9V R9019 LKP2 R9021/ R9365 REG9V SYS SET...
  • Page 39 2019/01/30 02:46:26 (GMT+09:00) 6.2 Screen Blank, Backlight Visible Screen Blank, Backlight visible - General Checking LVDS FFC B-Board/Main IC problem problem/Connector Start problem AC off and reinsert LVDS Replace TV turn on TV boot up normally? FFC Properly B-Board Normally? Replace new TV boot up normally? LVDS FFC Replace O-cell/...
  • Page 40 2019/01/30 02:46:26 (GMT+09:00) 6.3 Assemble and Disassemble Tuner Module Service manual (Assemble and Dissemble Tuner Module) For removing Tuner Module, After un screwed, Automatically the Module The insertion & extraction angle of the module is permitted to will float to correct degree. specified degree for connector So please extract it with keeping this degree.
  • Page 41 2019/01/30 02:46:26 (GMT+09:00) 6.3.1 No Picture: Tuner (Analog, Digital, Satellite) SYS SET...
  • Page 42 2019/01/30 02:46:26 (GMT+09:00) 6.3.1 No Picture: Tuner (Analog, Digital, Satellite) SYS SET...
  • Page 43 2019/01/30 02:46:26 (GMT+09:00) 6.3.1 No Picture: Tuner (Analog, Digital, Satellite) SYS SET...
  • Page 44 2019/01/30 02:46:26 (GMT+09:00) 6.3.2 For Analog Tuning Failed (All Destination) SYS SET...
  • Page 45 2019/01/30 02:46:26 (GMT+09:00) 6.3.2 For Analog Tuning Failed (All Destination) SYS SET...
  • Page 46 2019/01/30 02:46:26 (GMT+09:00) 6.3.2 For Analog Tuning Failed (All Destination) SYS SET...
  • Page 47 2019/01/30 02:46:26 (GMT+09:00) 6.3.2 For Analog Tuning Failed (All Destination) SYS SET...
  • Page 48 2019/01/30 02:46:26 (GMT+09:00) 6.3.2 For Analog Tuning Failed (All Destination) SYS SET...
  • Page 49 2019/01/30 02:46:26 (GMT+09:00) 6.3.3 For Digital Tuning 1 SYS SET...
  • Page 50 2019/01/30 02:46:26 (GMT+09:00) 6.3.3 For Digital Tuning 1 SYS SET...
  • Page 51 2019/01/30 02:46:26 (GMT+09:00) 6.3.3 For Digital Tuning 1 SYS SET...
  • Page 52 2019/01/30 02:46:26 (GMT+09:00) 6.3.3 For Digital Tuning 1 SYS SET...
  • Page 53 2019/01/30 02:46:26 (GMT+09:00) 6.3.3 For Digital Tuning 1 SYS SET...
  • Page 54 2019/01/30 02:46:26 (GMT+09:00) 6.3.4 For Digital Tuning 2 SYS SET...
  • Page 55 2019/01/30 02:46:26 (GMT+09:00) 6.3.4 For Digital Tuning 2 SYS SET...
  • Page 56 2019/01/30 02:46:26 (GMT+09:00) 6.3.4 For Digital Tuning 2 SYS SET...
  • Page 57 2019/01/30 02:46:26 (GMT+09:00) 6.3.5 EWBS (for PH-ISDB Only) 6.3.5 EWBS – TV unable to output audible tone /wakeup during standby after received EWBS signal– General Checking Start Connection Failed NG: Wrong region TV does not triggered due to region setting miss matched. Please use correct Main board Check region setting and confirm correct region “PH_ISDB”.
  • Page 58 2019/01/30 02:46:26 (GMT+09:00) 6.3.5 EWBS (for PH-ISDB Only) Board Board PWB (A-side) Detail Name board (A side) R5126 (EWBS line) R546 (3.3V_Sta ndby) R5126, R546 D6008 D6008 SYS SET...
  • Page 59 2019/01/30 02:46:26 (GMT+09:00) 6.4.1 USB Port 1 6.4.1 USB Port 1– No Detection / Cannot Play / No picture / No Sound – Checking Point Remarks: TV turn ON condition: START *1 Confirm USB Auto Start at Set-up Menu. Do a Factory Setting *2 Confirm with OSD on bottom panel, if playback not support.
  • Page 60 2019/01/30 02:46:26 (GMT+09:00) 6.4.2 USB Port 2 6.4.2 USB Port 2– No Detection / Cannot Play / No picture / No Sound – General Checking TV turn ON condition: Remarks: START *1 Confirm USB Auto Start at Set-up Menu. Do a Factory Setting *2 Confirm with OSD on bottom panel, if playback not support.
  • Page 61 2019/01/30 02:46:26 (GMT+09:00) 6.4.3 USB Port 1 or 2 6.4.2 USB Port 2 – No Detection / Cannot Play / No picture / No Sound – Checking Point USB (B-board Checking) – Checking 5V Points [USB Port 1 or 2] Board Board PWB (A side) Detail Name C7017...
  • Page 62 2019/01/30 02:46:26 (GMT+09:00) 6.4.3 USB Port 1 or 2 6.4.2 USB Port 2 – No Detection / Cannot Play / No picture / No Sound – Checking Point USB (B-board Checking) – Checking 5V Points [USB Port 1 or 2] Board Board PWB (A side) Detail Name C7017...
  • Page 63 2019/01/30 02:46:26 (GMT+09:00) 6.5 Ethernet 6.5 Ethernet – No Connect – General Checking TV turn ON condition: START Check if TV has good cable connection Set-up  Network setup Failed Check if any abnormal Check if the Ethernet or broken point on Connector (J7000) and parts NG cable is good Ethernet Connector and parts...
  • Page 64 2019/01/30 02:46:26 (GMT+09:00) 6.5 Ethernet 6.5 Ethernet – No Connect – Checking Point USB (B-board Checking) – Checking 5V Points [USB Port 1 or 2] Board Board PWB (A side) Detail Name J7000 Check have parts broken or RB7015 knock off? T7001 T7000 L7000 C704...
  • Page 65 2019/01/30 02:46:26 (GMT+09:00) 6.5 Ethernet 6.5 Ethernet – No Connect – Checking Point USB (B-board Checking) – Checking 5V Points [USB Port 1 or 2] Board Board PWB (A side) Detail Name Check have J7000 parts broken or knock off? RB7015 T7001 T7000 L7000 C704...
  • Page 66 2019/01/30 02:46:26 (GMT+09:00) 6.6 CI Slot 6.6 CI Slot – Cannot Play / No picture / No Sound – General Checking Remarks: *1 Important: Please use a known Good CICAM for testing TV turn ON condition: *2 Both CI Detection at Pin 36/67 should be 3.3V before CICAM insert and 0v when CICAM inserted.
  • Page 67 2019/01/30 02:46:26 (GMT+09:00) 6.6 CI Slot 6.6 CI Slot – Cannot Play / No picture / No Sound – Checking Point CI Slot (B-board Checking) – Checking 5V Points [1/3] Board Board PWB (A side) Detail Name CI 5V at PIN 17/18/51/52 SYS SET...
  • Page 68 2019/01/30 02:46:26 (GMT+09:00) 6.6 CI Slot 6.6 CI Slot – Cannot Play / No picture / No Sound – Checking Point CI Slot (B-board Checking) – Checking CI Detection Pin Points [2/3] Board Board PWB (A side) Detail Name Card Detect 1 – PIN 36 Card Detect 2 –...
  • Page 69 2019/01/30 02:46:26 (GMT+09:00) 6.6 CI Slot 6.6 CI Slot – Cannot Play / No picture / No Sound – Checking Point CI Slot (B-board Checking) – Checking Resistor Part Mounting Points [3/3] Board Board PWB (A side) Detail Name Ref. No. Location Ref.
  • Page 70 2019/01/30 02:46:26 (GMT+09:00) 6.7.1 HDMI Checking condition: 6.7.1 HDMI – No picture – General Checking - TV ON & HDMI Source ON except if the flow mentioned is AC OFF. - TV HDMI input connected to HDMI source (Player etc.) - TV Input Selection: HDMI HDMI No Picture Go to [OK] Picture recovered...
  • Page 71 2019/01/30 02:46:26 (GMT+09:00) 6.7.1 HDMI Checking condition: 6.7.1 HDMI – No picture – General Checking (Continue..) - TV ON & HDMI Source ON except if the flow mentioned is AC OFF. - TV HDMI input connected to HDMI source (Player etc.) Continue.. - TV Input Selection: HDMI [NG] Impedance ≠...
  • Page 72 2019/01/30 02:46:26 (GMT+09:00) 6.7.2 HDCP Failure Analysis Checking condition: 6.7.2 HDCP Failure Analysis – General Checking - TV ON & HDMI Source ON except if the flow mentioned is AC OFF. - TV HDMI input connected to HDMI source (Player etc.) - TV Input Selection: HDMI HDCP Failure Analysis [OK] Compatible HDCP 1.4...
  • Page 73 2019/01/30 02:46:26 (GMT+09:00) 6.7.3 +5V Power Failure Analysis Checking condition: 6.7.3+5V Power Failure Analysis – General Checking - TV ON & HDMI Source ON except if the flow mentioned is AC OFF. - TV HDMI input connected to HDMI source (Player etc.) - TV Input Selection: HDMI +5V Power Failure Analysis...
  • Page 74 2019/01/30 02:46:26 (GMT+09:00) 6.7.4 HPD Failure Analysis Checking condition: 6.7.4 HPD Failure Analysis – General Checking - TV ON & HDMI Source ON except if the flow mentioned is AC OFF. - TV HDMI input connected to HDMI source (Player etc.) - TV Input Selection: HDMI Failure Analysis [OK] Any of the part as below R4001, R4004 ≈...
  • Page 75 2019/01/30 02:46:26 (GMT+09:00) 6.7.5 I2C Failure Analysis Checking condition: 6.7.5 I2C Failure Analysis – General Checking - TV ON & HDMI Source ON except if the flow mentioned is AC OFF. - TV HDMI input connected to HDMI source (Player etc.) - TV Input Selection: HDMI Failure Analysis Check I2C GPIO Line [OK] Impedance ≈...
  • Page 76 2019/01/30 02:46:26 (GMT+09:00) 6.7.6 TMDS Failure Analysis Checking condition: 6.7.6 TMDS Failure Analysis – General Checking - TV ON & HDMI Source ON except if the flow mentioned is AC OFF. - TV HDMI input connected to HDMI source (Player etc.) - TV Input Selection: HDMI TMDS Failure Analysis Check I2C GPIO Line impedance...
  • Page 77 2019/01/30 02:46:26 (GMT+09:00) 6.7.7 HDMI Bravia Sync (CEC) Not function Checking condition: 6.7.7 HDMI Bravia Sync (CEC) Not function – General Checking - TV ON & HDMI Source ON except if the flow mentioned is AC OFF. - TV HDMI input connected to HDMI source (Player etc.) - TV Input Selection: HDMI Bravia Sync (CEC) Not Function...
  • Page 78 2019/01/30 02:46:26 (GMT+09:00) 6.7.7 HDMI – No picture 6.7.7 HDMI No picture– Checking Point (BPA Board) L4002 L404 R4010 R4011 R4021 RB4005 HDMI 2 (CN4000) Zoom VR4006 R4007 R4001 HDMI 1 (CN4001) R4018 R4015 L4000 L4001 R4008 R4009 R4020 RB4004 VR4007 R4004 R4005 SYS SET...
  • Page 79 2019/01/30 02:46:26 (GMT+09:00) 6.7.7 HDMI – No picture 6.7.7 HDMI No picture– Checking Point (BPE Board) L4002 L404 R4011 R4010 HDMI 2 R4021 (CN4000) RB400 Zoom VR400 HDMI 1 (CN4001) R4007 R4001 R4018 R4015 L4000 L4001 R4009 R4008 R4020 RB400 VR400 R4005 R4004 SYS SET...
  • Page 80 2019/01/30 02:46:26 (GMT+09:00) 6.7.7 HDMI – No picture 6.7.7 HDMI No picture– Part List Ref No Part No Description L4002,L404,L4000,L4001 1-460-611-11 COMMON MODE CHOKE COIL RB4005,RB4004 1-234-380-21 RES, NETWORK 47K (1005X4) R4005,R4007 1-250-495-11 RES,METAL FILM CHIP 1.0K(1005) R4004,R4001 1-218-935-81 RES, CHIP 33 (1005) R4020,R4021 1-216-864-91 CONDUCTOR, CHIP (1608)
  • Page 81 2019/01/30 02:46:26 (GMT+09:00) 6.8 WIFI 6.8 WIFI – Cannot search device / Connection Failed – General Checking Start Connection Failed NG: Signal NG: Built-In WiFi Off Strength Low AP Device WiFi Feature is Check Built-In WiFi Check AP/Device Problem Not Enable (Change AP/Device) Change B*Board / NG: WiFi Direct Off Check WiFi Direct...
  • Page 82 2019/01/30 02:46:26 (GMT+09:00) 6.8 WIFI 6.8 WIFI – Cannot search device / Connection Failed – Checking Point Board Name Board PWB (A side) Detail BPA (Q9501) Q9501 Q9501 CN9500 CN9500 SYS SET...
  • Page 83 2019/01/30 02:46:26 (GMT+09:00) 6.8 WIFI 6.8 WIFI – Cannot search device / Connection Failed – Checking Point Board Name Board PWB (A side) Detail BPE (Q9501) Q9501 Q9501 CN9500 CN9500 SYS SET...
  • Page 84 6.8 WIFI 2019/01/30 02:46:26 (GMT+09:00) 6.8 WIFI 6.8 WIFI – Cannot search device / Connection Failed – Checking Point SYS SET...
  • Page 85 2019/01/30 02:46:26 (GMT+09:00) 6.9 Video Analog Signal Path 6.9.1 Video Analog Signal Path – No Picture – General Checking - WW Destination Except EU (BPA) Video No Picture Check if input on OSD Check R3021 voltage. J3002 Connectivity is GREY OUT? Is it 3.3V? Problem.
  • Page 86 2019/01/30 02:46:26 (GMT+09:00) 6.9 Video Analog Signal Path 6.9.2 Video Analog Signal Path – No Picture – Checking Point - WW Destination (BPA) Board Board PWB (A side) Details Name J3002 C3007 Details C3007 R3018 R3018 J3002 VR3001 R3021 R3005 R3005 C3001 Details R3021 VR3001...
  • Page 87 2019/01/30 02:46:26 (GMT+09:00) 6.9 Video Analog Signal Path 6.9.3 Video Analog Signal Path – No Picture – General Checking - EU Only (BPE) Video No Picture Check if input on OSD Check R3021 voltage. J3002 Connectivity is GREY OUT? Is it 3.3V? Problem.
  • Page 88 2019/01/30 02:46:26 (GMT+09:00) 6.9 Video Analog Signal Path 6.9.4 Video Analog Signal Path – No Picture – Checking Point - EU Only (BPE) Board Name Board PWB (A side) Details J3002 C3007 R3018 Details C3007 R3018 J3002 VR3001 R3005 R3005 C3001 R3021 R3021 Details C3001...
  • Page 89 2019/01/30 02:46:26 (GMT+09:00) 7.1.1 H Board Troubleshooting Flow Condition: TV is plugged to AC power 7.1.1 H Board Troubleshooting Flow (For SV/SVW all models) - General Checking supply, and AC power supply is turned ON. TV cannot be controlled by remote commander Place remote commander (RC) Change Mechanical part Check White LED...
  • Page 90 2019/01/30 02:46:26 (GMT+09:00) 7.1.1 H Board Troubleshooting Flow 7.1.1 H Board Troubleshooting Flow – Checking Point Board name Board picture Pin1(STBY 5V) of H board connector HKT-E R5047 B board R5047 SYS SET...
  • Page 91 2019/01/30 02:46:26 (GMT+09:00) 7.1.2 Switch Unit Troubleshooting Flow *VOLTAGE LEVEL FOR EACH PRESSED BUTTON (for SV (all 7.1.2 Switch Unit Troubleshooting Flow - General Checking model ) switch unit ) Voltage Voltage range Switch Unit NOT FUNCTIONING (average) 0.00 – 0.2 0.000 1.00 –...
  • Page 92 2019/01/30 02:46:26 (GMT+09:00) 7.1.2 Switch Unit Troubleshooting Flow 7.1.2 Switch Unit Troubleshooting Flow – Checking Point PIN 1 PIN 3 PIN 2 CP/CPL CONNECTOR SV/SVW Connecting PIN SYS SET...
  • Page 93 2019/01/30 02:46:26 (GMT+09:00) 7.2.1 DCDC Converter Basic Block Diagram BPA/BPE DDC Basic Block Diagram Adapter LKP Board B-Board IC6000 IC6001 PMIC DDC Input 5V DDC PMIC 1.2V 1.5V IC6004 PMIC LDO 19.5V 19.5V Input 1.8V 3.3V DDC Adapter 1.1V BPE:IC6002/ BPA:IC6005 1.8V_EMMC 12V DDC SYS SET...
  • Page 94 2019/01/30 02:46:26 (GMT+09:00) 7.3.0 Overall DCDC Converter Check DC-DC Converter Reference Points Board IC Ref Voltage supply Output ref. Enable pin Enable source Fuse Vcc ref. +1.1V C6014 +1.2V C604 IC6000 +1.5V C6023 BPA/BPE +1.8V_EMMC C6065 +1.8V C6006 F6001/ IC6001 +STBY_5V C6041 R6040 MAIN_RST C6029...
  • Page 95 2019/01/30 02:46:26 (GMT+09:00) 7.3.0 Overall DCDC Converter Check IC6001 START Check C6041 Voltage. Refer 5V DDC Checking Procedure Is the voltage 5V? IC6000 Check C6014 Voltage. Refer PMIC Checking Procedure Is the voltage 1.1V? BPE:IC6002/BPA:IC6005 Check BPE:C6054/BPA:C6107 Refer 12V DDC Checking Procedure IC6000 Voltage.
  • Page 96 2019/01/30 02:46:26 (GMT+09:00) 7.3.0 Overall DCDC Converter Check PMIC and DCDC location BPA Board BPE Board IC6005 (12V DDC Checking Procedure) IC6001 (5V DDC Checking IC6001 (5V DDC Procedure) Checking Procedure) IC6002 (12V DDC Checking IC6000 (PMIC Procedure) Checking Procedure) IC6000 (PMIC Checking IC6004 (3.3V DDC Procedure)
  • Page 97 2019/01/30 02:46:26 (GMT+09:00) 7.3.1 IC6000 - PMIC Checking Procedure 7.3.1 IC6000 Checking Procedure BPA/BPE Board START Check the input voltage Refer 5V DDC Checking Procedure C6069 voltage 5V? Check STB_SDA and STB_SDL Refer 3.3V DDC Checking Procedure Is the voltage 3.3V? Change IC6000 SYS SET...
  • Page 98 2019/01/30 02:46:26 (GMT+09:00) 7.3.1 IC6000 - PMIC Checking Procedure PMIC BPA Board BPE Board STBY_5V STBY_5V 1.2V (C604) (C6069) (C6069) 1.8V (C6006) 1.8V (C6006) 1.1V (C6014) 1.1V (C6014) IC6000 3.3V_EN 1.8V_EMMC (R6055) IC6000 (C6065) 1.8V_EMMC (C6065) 1.2V (C604) STB_SDA (via) STB_SCL (via) 3.3V_EN STB_SDA STB_SCL...
  • Page 99 2019/01/30 02:46:26 (GMT+09:00) 7.3.2 IC6001 – 5V DDC Checking Procedure 7.3.2 IC6001Checking Procedure BPA/BPE Board START Check continuity test at fuse terminals. Change F6001/F604 F6001/F604 Check input F6001/F604 voltage Check LKP-Board Is voltage >19.0V? Check EN signal R6040 voltage Refer 3.3V DDC Checking Procedure Is voltage >2.5V? Check Vcc C6029...
  • Page 100 2019/01/30 02:46:26 (GMT+09:00) 7.3.2 IC6001 – 5V DDC Checking Procedure 5V DDC BPA Board BPE Board EN (R6040) EN (R6040) IC6001 IC6001 19.5V_O 19.5V_O STBY_5V (C6041) STBY_5V (C6041) (F6001/F604) (F6001/F604) SYS SET...
  • Page 101 2019/01/30 02:46:26 (GMT+09:00) 7.3.3 IC6002 – 12V DDC Checking Procedure 7.3.3 IC6002 Checking Procedure BPA Board BPE Board START START Check continuity test at fuse terminals. Change F6000/F6004 Check continuity test F6000/F6004 Shorted? at fuse terminals. Change F6000/F6004 F6000/F6004 Shorted? Check input F6000/F6004 voltage LKP Board...
  • Page 102 2019/01/30 02:46:26 (GMT+09:00) 7.3.3 IC6002 – 12V DDC Checking Procedure 12V DDC BPA Board BPE Board 19.5V_O 19.5V_O (F6000/F6004) (F6000/F6004) IC6002 3.3V_EN (R6051) IC6005 PANEL_PWR (R6118) 12V LNB (C6054) 12V LNB (C6107) SYS SET...
  • Page 103 2019/01/30 02:46:26 (GMT+09:00) 7.3.4 IC6004 – 3.3V DDC Checking Procedure 7.3.4 IC6004 Checking Procedure BPA/BPE Board START Check continuity test at fuse terminals. Change F6002/F6005 F6002/F6005 Shorted? Check input F6002/F6005 voltage Check LKP-Board Is voltage > 19.0V? Check EN signal R6100 voltage Change IC6004 Is voltage >...
  • Page 104 2019/01/30 02:46:26 (GMT+09:00) 7.3.4 IC6004 – 3.3V DDC Checking Procedure 3.3V DDC BPA Board BPE Board 3.3V_STBY 19.5V_O Enable (R6100) (C6090) (F6002/F6005) IC6004 IC6004 19.5V_O Enable (R6100) 3.3V_STBY (F6002/F6005) (C6090) SYS SET...
  • Page 105 2019/01/30 02:46:26 (GMT+09:00) 7.3.5 Q6005 – 3.3V SWITCH Checking Procedure 7.3.4 Q6004 Checking Procedure BPA/BPE Board START Check VG signal Change Q6005 Q6005 #pin2 Is voltage > 3.0V? Check VB signal Q6004 #pin1 Change Q6004 Is voltage > 3.0V? Refer PMIC Checking Procedure SYS SET...
  • Page 106 2019/01/30 02:46:26 (GMT+09:00) 7.3.5 Q6005 – 3.3V SWITCH Checking Procedure 3.3V SWITCH BPA Board BPE Board 3.3V (Q6005 #pin2) 3.3V_EN (Q6004 #pin1) 3.3V_EN (Q6004 #pin1) Q6004 Q6005 Q6004 Q6005 3.3V (Q6005 #pin2) SYS SET...
  • Page 107 2019/01/30 02:46:26 (GMT+09:00) 8.1 Audio D Amp IC Normal Operation Condition 8.1 Audio D Amp IC Normal Operation Condition IC4001 Common IC4001 Common Label Name Label Name Voltage Frequency Voltage Frequency VCCP2 19.5V ADDR GNDP2 BCLK 3.3Vpp 3.07MHz BSP2P 14.5Vrms LRCLK 3.3Vpp 48kHz OUT2P 9.6Vrms...
  • Page 108 2019/01/30 02:46:26 (GMT+09:00) 8.1 Audio D Amp IC Normal Operation Condition 8.1 Audio D Amp IC Normal Operation Condition LKP1 board F4001 F4002 Zoom IC4001 19.5V 1, 5, 8, 9, 11 SYS SET...
  • Page 109 2019/01/30 02:46:26 (GMT+09:00) 8.1 Audio D Amp IC Normal Operation Condition 8.1 Audio D Amp IC Normal Operation Condition LKP2 board Zoom F4001 F4002 IC4001 1, 5, 8, 9, 11 19.5V SYS SET...
  • Page 110 2019/01/30 02:46:26 (GMT+09:00) 8.2 Troubleshooting Detail Audio Problem 8.2 Troubleshooting detail audio problem Speaker Refer Audio Problem “Speaker No Sound” No Sound? Headphone (HP) Out Refer “HP Out No Sound” No Sound? Video/Component Refer “Analog Audio Input No Sound” No Sound? Analog RF Refer “Analog RF No Sound”...
  • Page 111 2019/01/30 02:46:26 (GMT+09:00) 8.2 Troubleshooting Detail Audio Problem 8.2.1 Speaker No Sound START No Sound Sound Do a Factory Setting & set to desire channel with sound No Sound J3501 Pin4 ≠ 3.3V Headphone No Insert, Sound Replace J3501 Check J3501 Pin4 Voltage No Sound No Sound No connectivity...
  • Page 112 2019/01/30 02:46:26 (GMT+09:00) 8.2 Troubleshooting Detail Audio Problem 8.2.1 Speaker No Sound board IC5000 IC5000 SDATA0 BCLK LRCL SYS SET...
  • Page 113 2019/01/30 02:46:26 (GMT+09:00) 8.2 Troubleshooting Detail Audio Problem 8.2.1 Speaker No Sound board IC5000 IC5000 SDATA0 BCLK LRCL SYS SET...
  • Page 114 2019/01/30 02:46:26 (GMT+09:00) 8.2 Troubleshooting Detail Audio Problem 8.2.2 Headphone (HP) Out No Sound START No Sound Sound Do a Factory Setting & set to desire channel with sound No Sound Sound Check AV Setup, Headphone is selected No Sound Sound Use another Headphone Headphone problem No Sound, Headphone OK No Sound, Headphone OK,...
  • Page 115 2019/01/30 02:46:26 (GMT+09:00) 8.2 Troubleshooting Detail Audio Problem 8.2.2 Headphone (HP) Out No Sound board IC5000 IC3500 board IC5000 Pin4 J3501 SYS SET...
  • Page 116 8.2 Troubleshooting Detail Audio Problem 2019/01/30 02:46:26 (GMT+09:00) 8.2 Troubleshooting Detail Audio Problem 8.2.3 Analog Audio Input No Sound START No Sound Sound Do a Factory Setting & set to desire channel with sound No Sound Sound Check correct Source mode is selected No Sound Sound RCA cable...
  • Page 117 2019/01/30 02:46:26 (GMT+09:00) 8.2 Troubleshooting Detail Audio Problem 8.2.4 Analog RF No Sound START No Sound Sound Do a Factory Setting & complete the RF tuning No Sound Sound RF cable, OK? Change RF cable No Sound Sound RF source, OK? Change RF source/channel No Sound Raster sound, OK? Refer “Speaker No Sound”...
  • Page 118 2019/01/30 02:46:26 (GMT+09:00) 8.2 Troubleshooting Detail Audio Problem 8.2.5 HDMI Audio No Sound START No Sound Sound Do a Factory Setting & set to desire HDMI source with sound No Sound Sound HDMI cable, OK? Change HDMI cable No Sound Sound HDMI source, OK? Change HDMI source/channel No Sound Refer “HDMI No Picture...
  • Page 119 2019/01/30 02:46:26 (GMT+09:00) 8.2 Troubleshooting Detail Audio Problem Checking condition: 8.2.5.1 HDMI ARC Failure - TV ON & HDMI Source ON except if the flow mentioned is AC OFF. - TV HDMI input connected to HDMI source (Player etc.) HDMI ARC - TV Input Selection: HDMI Failure [NG] Source Not Support ARC / ARC Source not function Normally...
  • Page 120 2019/01/30 02:46:26 (GMT+09:00) 8.2 Troubleshooting Detail Audio Problem 8.2.5.1 HDMI ARC Failure (BPA Board) HDMI 2 (CN4000) Zoom HDMI 1 (CN4001) R4018 Ref No Part No Description R4018 1-218-944-81 RES, CHIP 180 (1005) SYS SET...
  • Page 121 2019/01/30 02:46:26 (GMT+09:00) 8.2 Troubleshooting Detail Audio Problem 8.2.5.1 HDMI ARC Failure (BPE Board) HDMI 2 (CN4000) Zoom HDMI 1 (CN4001) R4018 Ref No Part No Description R4018 1-218-944-81 RES, CHIP 180 (1005) SYS SET...
  • Page 122 2019/01/30 02:46:26 (GMT+09:00) 8.2 Troubleshooting Detail Audio Problem 8.2.6 USB No Sound START No Sound Do a Factory Setting & Sound set to desire USB file with sound No Sound Sound USB device, OK? Change USB device No Sound Sound Change USB USB source, OK? source/channel No Sound...

  • Page 123: Service Adjustments

    2019/01/30 02:46:26 (GMT+09:00) SECTION 4 SERVICE ADJUSTMENT When finished the operation of service mode , please AC Plug OFF/ON the TV set *If you don’t do AC plug OFF/ON, remain the Service Mode App and user can see the Service Mode after RC ON. 4.1 How to Enter Service Mode From Standby Mode 1.
  • Page 124 2019/01/30 02:46:26 (GMT+09:00) 4.2 Service Mode Unique Items These items availability depend on TV region Items Region/s Available Wide Band Tuning UC only Update CI+ EU only Credentials HDD Performance EU&PAD(AUS/NZ only) Check EU&PAD(AUS/NZ only) Except PAA, CHI/PE/PHI, SDB Service Menu BR/ARG/ECU Default Date for HDD EU&PAD(AUS/NZ only) Recording...
  • Page 125 2019/01/30 02:46:26 (GMT+09:00) 4.4 Software Version Press “Enter” or “→” button to enter “Status Information” Only available for IPTV model 2) Press “Enter” or “Return” button to return to Service Mode SYS SET...
  • Page 126 2019/01/30 02:46:26 (GMT+09:00) Go to Self diagnosis history through Service Mode 4.5 How to enter Self Check 1) In Service Mode, select “Self diagnosis history”, press “Enter” or “” button to enter Self Check. Service Mode SELF CHECK Status Information >> Self diagnosis history >>...
  • Page 127 2019/01/30 02:46:26 (GMT+09:00) 4.6 Diagnosis Menu Information Entry Error name Error count 1. Go to Standby by pressing the power button of remote/power key. 2. Push the buttons sequentially: <Display> <5> <Vol -> <Power> SELF CHECK Exit - Power off & on Back MAIN_POWER AUD_ERR...
  • Page 128 2019/01/30 02:46:26 (GMT+09:00) 4.7 Failure Diagnosis by LED Standby LED Flashing Times Monitoring Items Content REG19.5V_MON REG 19.5V Failure X_AUDIO_MON Audio Failure AUDIO_I2C(M_SDA1/SCL1) Audio I2C communication failure PANEL12V_MON Panel 12V Failure PANEL I2C ACK Panel ID NVM Failure BL_ERR Backlight Error LED_I2C(M_SDA1/SCL1) LED Driver I2C communication failure SYS SET...
  • Page 129 2019/01/30 02:46:26 (GMT+09:00) 4.8 Panel Selection and LVDS Spectrum (%) Please refer to the following Table to confirm if Panel Selection and LVDS Spectrum(%) values are correct. Model Panel Selection LVDS spectrum SV 43 45_NS8S04CNO0101_7 SV 50 46_NS8S006CNN0101_7 SVW 43 48_NS8S04CNO0101_7 SVW 50 46_NS8S006CNN0101_7 SYS SET...
  • Page 130 2019/01/30 02:46:26 (GMT+09:00) 4.9 Serial Number Edit 1) Press “→” button to enter edit mode for Serial Number 2) Press Up or Down button to change number and “” button to edit next number SYS SET...
  • Page 131 2019/01/30 02:46:26 (GMT+09:00) 4.9 Serial Number Edit After user input data , press <Enter>. Pop dialog will appear to inform user to confirm data. Press → or ← button to select YES or NO. Select YES if input data is correct. Select NO if input data is incorrect. Press <Enter>...
  • Page 132 2019/01/30 02:46:26 (GMT+09:00) 4.9 Serial Number Edit 5) If NO is selected, the input data is not saved into EEPROM. The serial number that has been input is displayed. User still can edit the Serial Number. * The font color of NO is change to black when it is selected * Serial Number &...
  • Page 133 2019/01/30 02:46:26 (GMT+09:00) 4.10 Model Number Setting 1) Press “→” button to enter edit mode for Model Number 2) Press Up or Down button to select character and “” to edit next character SYS SET...
  • Page 134 2019/01/30 02:46:26 (GMT+09:00) 4.10 Model Number Setting 3) Model Name can be set ONLY ONCE. After user input data , press <Enter>. Pop dialog will appear to inform user to confirm data. Press → or ← button to select YES or NO. Select YES if input data is correct.
  • Page 135 2019/01/30 02:46:26 (GMT+09:00) 4.10 Model Number Setting 5) If NO is selected, the input data is not saved into EEPROM. The model name that has been input is displayed. User still can edit the Model Name. * The font color of NO is change to black when it is selected * Serial Number &...
  • Page 136 2019/01/30 02:46:26 (GMT+09:00) 4.11 White Balance Press “Enter” or “” button to enter White Balance adjustment Press “” or “” to change intended Color Temp adjustment (Cool , Neutral and Warm) SYS SET...
  • Page 137 2019/01/30 02:46:26 (GMT+09:00) 4.11 White Balance Start WB adjustment by changing R/G/B Gain & Offset register R/G/B Gain setting around High luminance Adjustment (Default Value 512) R/G/B Offset setting around Low luminance Adjustment (Default Value 0) After adjustment completed go to “Data Save” and press “” until it shows “W/B” and press “Enter”. Press Press ...
  • Page 138 2019/01/30 02:46:26 (GMT+09:00) 4.11 White Balance Remark#1 “Data Save” only will save current Color Temp. adjustment value. For this case only Cool Color Temp. will be saved to TV set. To save Neutral and Warm adjustment we need to change Color Temp. to intended Color temp. adjustment and execute “Data Save”...
  • Page 139 2019/01/30 02:46:26 (GMT+09:00) 4.11 White Balance Remark #2: “Data Recall” only will reset current Color Temp. data to default. For this case only Cool Color Temp. will be reset to TV set. To reset Neutral and Warm adjustment we need to change Color Temp. to intended Color temp.
  • Page 140 2019/01/30 02:46:26 (GMT+09:00) 4.12 Aging Mode Press “” button to turn on “Aging Mode” Press “” button to turn off “Aging Mode” SYS SET...
  • Page 141 2019/01/30 02:46:26 (GMT+09:00) 4.13 Tuner Detection Press “Enter” or “” button to enter Tuner Detection Go to “Back” and press “Enter” or “” button to return to Service Mode SYS SET...
  • Page 142 2019/01/30 02:46:26 (GMT+09:00) 4.13 Tuner Detection 3) Go to “Tuner Check” and press “” or “” to enter selection “On” or “Off” *. • “Tuner Check” = , to execute “Tuner Check” and update “Tuner Status” value. • “Tuner Check” = (default value). Always set “Tuner Check” to “Off” after confirm “Tuner Status”...
  • Page 143 2019/01/30 02:46:26 (GMT+09:00) 4.14 ATMOS CEC Disable 1) Go to “ATMOS CEC DISABLE” and Press “<” or “>” button to select ‘0’ or ‘A’ ATMOS_CEC_DISABLE (EEPROM 0x30A0) Data : [0/A] Default : 0 Purpose : Data [A] is able to skip Atmos judgment by CEC <Report Short Audio Descriptor>...
  • Page 144 2019/01/30 02:46:26 (GMT+09:00) 4.15 CEC Force LA = 0 1) Go to “CEC FORCE LA=0” and Press “<” or “>” button to select ‘0’ or ‘A’ CEC_Force_LA=0 Data : [0/A] Default : 0 Purpose : To avoid CEC conflict for Non CEC compliant device.
  • Page 145 2019/01/30 02:46:26 (GMT+09:00) 4.16 Read HDMI EDID 1) Go to “Read HDMI EDID” and Press “>” button to enter “Read HDMI EDID” display 2) Press “Enter” at back selection or “Return” button to return to Service Mode Read_HDMI_EDID Purpose : To read HDMI EDID data without using any external equipment.
  • Page 146 2019/01/30 02:46:26 (GMT+09:00) 4.17 Option Bit 1) Go to “Option bit” and Press “Enter” or “” button Option Purpose Not used for Service. Please don’t change Segment any setting. Not used for Service. Please don’t change Shipping region any setting. To select the Tuner type of the Set. Please don’t change this setting unless for service Tuner ID board replacement (EU only) .
  • Page 147 2019/01/30 02:46:26 (GMT+09:00) 4.17 Option Bit (Tuner ID) 1) In Tuner ID service mode, Press “” to select “Shipping Region” 2) Press enter to confirm Tuner ID. Pop-up will display and Press “” or “” button to select *Tuner ID. (availability depends on SW pkg) 3) Press “<“...

  • Page 148: Diagrams

    2019/01/30 02:46:26 (GMT+09:00) SECTION 5 DIAGRAMS Some control lines are left out. 5.1 SV 43/50 Block Diagram FY19 2K System Block Diagram (SV) USB Stack USB2.0 Port 0 Side-Key PCMIA *for Europe Region H-Board USB2.0 Port 1 PCMCIA eMMC4.5 DDR3 4G+4G P-TS MT5581S D-AMP HDMI 2...
  • Page 149 2019/01/30 02:46:26 (GMT+09:00) 5.2 Connector Diagram SV LKP1 43’ (Supplementary information) SYS SET...
  • Page 150 2019/01/30 02:46:26 (GMT+09:00) 5.2 Connector Diagram SV LKP2 50’ (Supplementary information) SYS SET...
  • Page 151 2019/01/30 02:46:26 (GMT+09:00) Sony EMCS (M) Sdn. Bhd. English 9-888-763-01 SVPM © 2018.01 SYS SET...

This manual is also suitable for:

Kdl-50w6 g seriesKdl-43wg6 seriesKdl-50wg6 series