Advertisement
4.13 Tuner Detection
3) Go to "Tuner Check" and press "" or "" to enter selection "On" or "Off" *.
•
"Tuner Check" =
•
"Tuner Check" =
"Tuner Status" value
* Perform AC Off/On for changes to take effect.
4) "Tuner Status" has
3
values. **
•
"Tuner Status" = OK. Tuner module is OK.
•
"Tuner Status" = Incorrect. Tuner module is not inserted correctly.
•
"Tuner Status" =
**"Tuner Status" will only update if "Tuner Check"='On' and AC Off/On is already performed.
5) "Expected Tuner Type" is the expected tuner module to be inserted to TV.
6) "Mounted Tuner Type" is the type of tuner module that is currently inserted to TV
Tuner
Tuner Module region
Type
0
AEP T2S2-1Tuner
2
AEP-T2
3
TW-DVB-- 1 Tuner
4
CH/HK-1Tuner
UC/MX- 1 Tuner / TW-DVB – 1 Tuner
5
6
LA-T2 (Col)/LA-ISDB (BR/AR/EC/Chile/Peru/Urg) - 1 Tuner
10
PAA/ AEP-STD-1Tuner
PA-T2-LNA / PH-ISDB-LNA – 1 tuner
13
, to execute "Tuner Check" and update "Tuner Status" value.
On
(default value). Always set "Tuner Check" to "Off" after confirm
Off
Wrong
Region. Wrong tuner module is inserted.
142
SYS SET
Advertisement
