Advertisement
2019/01/30 02:46:26 (GMT+09:00)
8.2 Troubleshooting Detail Audio Problem
8.2.5.1 HDMI ARC Failure
[OK] Source Support ARC &
ARC Source function Normally
[OK] CEC Setting On
[NG] ARC not functioning
[OK] Connector no abnormality
[OK] R4018 ≈ 180Ω ±5%
HDMI ARC
Failure
[NG] Source Not Support ARC /
ARC Source not function Normally
Confirm Source (Player)
ARC Condition/Capability
[NG] CEC not functioning
[NG] CEC setting Off
Bravia Sync (CEC)
TV setting
[NG] CEC not functioning
[OK] ARC functioning
Factory Reset &
Change Proven OK
HDMI cable
Physical
[NG] Connector abnormal
appearance Check On
HDMI connector
[NG] ARC not functioning
Check impedance
[NG] R4018 ≠ 180Ω
Of R4018 Resistor
during AC OFF
[NG] ARC not functioning
Checking condition:
- TV ON & HDMI Source ON except if the flow mentioned is AC OFF.
- TV HDMI input connected to HDMI source (Player etc.)
- TV Input Selection: HDMI
[OK] ARC functioning
Change to CEC
Compatible source
[OK] ARC functioning
Turn TV Bravia Sync
"On"
[OK] ARC functioning
HDMI Connector Broken.
Replace & Re-verify
[OK] ARC functioning
Resistor Broken.
Replace & Re-verify
Replace B-Board
And Re-verify
END
119
SYS SET
Advertisement
