Hyundai Santa Fe 2022 Owner's Manual page 550

CAUTION
Take the following precautions to
maintain optimal performance of the
detecting sensors:
• Never disassemble the detecting
sensor or sensor assembly, or apply
any impact on it.
• If the detecting sensor have been
replaced or repaired, have your
vehicle inspected by an authorized
HYUNDAI dealer.
• Remote Smart Parking Assist
may malfunction if the vehicle
bumper height or ultrasonic sensor
installation has been modified
or damaged. Any non-factory
installed equipment or accessories
may also interfere with the sensor
performance.
• When the ultrasonic sensor is frozen
or stained with snow, dirt, or water,
the sensor may be not operate until
the stains are removed using a soft
cloth.
• Do not push, scratch or strike the
ultrasonic sensor. Sensor damage
could occur.
• Do not spray the ultrasonic sensors
or its surrounding area directly with
a high pressure washer.
Remote Smart Parking Assist
Settings
Settings features
Warning Volume
With the Engine Start/Stop button in the
ON position, select 'Driver Assistance →
Warning Volume' from the Settings menu
to change the Warning Volume to 'High',
'Medium' or 'Low' for Remote Smart
Parking Assist.
If you change the Warning Volume,
the Warning Volume of other Driver
Assistance systems may change.
07
OTMPH071017N
7-139