Hyundai Santa Fe 2022 Owner's Manual page 507

Driver assistance system
Highway Driving Assist
Operation
Basic function
Display and control
You can see the status of the
HighwayDriving Assist operation in
the DrivingAssist view on the cluster.
Refer to "ViewModes" section in
chapter 4.Highway Driving Assist will
be displayedas below depending on the
status of the function.
„ Standby state
„
OTMPH071018N
(1) Highway Driving Assist indicator,
whether there is a vehicle ahead and
the selected distance level
à Highway Driving Assist indicator
- Green : Operating state
- Grey : Standby state
- White blink: Accelerator
depressed state
(2) Set speed
(3) Lane Following Assist indicator
(4) Whether there is a vehicle ahead and
the selected headway
(5) Whether the lane is detected or not
Information
For more details on the display refer to
"Smart Cruise Control (SCC)" and "Lane
Following Assist (LFA)" sections in this
chapter.
7-96
„ Operating state
„
OTMA070010
Highway Driving Assist operating
Highway Driving Assist will operate when
entering or driving on the main road of
highways (or motorways), and satisfying
all the following conditions:
- Lane Following Assist is operating
- Smart Cruise Control is operating
Information
• While driving on the highway (or
motorway), if Smart Cruise Control
starts operating, Highway Driving
Assist will operate.
• When entering the main roads of
highways (or motorways) while
Smart Cruise Control is operating,
Driving Assist will not turn on if Lane
Following Assist is turned off.