Hyundai Santa Fe 2022 Owner's Manual page 450

• If the rear corner radars have been
replaced or repaired, the vehicle be
inspected by an authorized HYUNDAI
dealer.
• Use only genuine parts to repair the
rear bumper where the rear corner
radar is located.
• Do not apply license plate frame or
objects, such as a bumper sticker,
film or a bumper guard near the rear
corner radar.
• Blind-Spot Collision-Avoidance
Assist may not work properly if the
bumper has been replaced, or the
surroundings of the rear corner radar
has been damaged or paint has been
applied.
• If a trailer, carrier, etc., is installed,
it may adversely affect the
performance of the rear corner radar
or Blind-Spot Collision-Avoidance
Assist may not operate.
For more details on the precautions
of the front view camera, refer to
"Forward Collision-Avoidance Assist
(FCA)" section in this chapter.
Blind-Spot Collision-Avoidance
Assist Settings
Setting features
Blind-Spot Safety
With the engine on, select or deselect
'Driver Assistance → Blind-Spot Safety'
from the Settings menu to set whether or
not to use each function.
- If 'Active assist' is selected, Blind-Spot
Collision-Avoidance Assist will warn
the driver with a warning message, an
audible warning and braking assist will
be applied depending on the collision
risk levels.
- If 'Warning Only' is selected, Blind-
Spot Collision-Avoidance Assist
will warn the driver with a warning
message and an audible warning
depending on the collision risk levels.
Braking will not be assisted.
- If 'Off' is selected, Blind-Spot
Collision-Avoidance Assist will turn
off.
07
OTM070096N
7-39