Hyundai Santa Fe 2022 Owner's Manual page 523

Driver assistance system
Warning Volume
With the engine on, select 'Driver
Assistance → Warning Volume' from the
Settings menu to change the Warning
Volume to 'High', 'Medium' or 'Low' for
Rear Cross-Traffic Collision-Avoidance
Assist.
However, when Warning Volume is
turned off, the steering wheel vibration
function will turn on if it was turned off.
If you change the Warning Volume,
the Warning Volume of other Driver
Assistance systems may change.
CAUTION
• The setting of the Warning timing
and Warning Volume applies to
all functions of the Rear Collision-
Avoidance Assist.
• Even though 'Normal' is selected for
Warning Timing, if the vehicles from
the left and right side approaches
at high speed, the initial warning
activation time may seem late.
• Select 'Late' for Warning Timing
when traffic is light and when driving
speed is slow.
Information
If the engine is restarted, Warning Timing
and Warning Volume will maintain the
last setting.
7-112
Rear Cross-Traffic Cross-Traffic
Assist Operation
Warning and control
Rear Cross-Traffic Collision-Avoidance
Assist will warn and control the vehicle
depending on collision level: 'Collision
Warning', 'Emergency Braking' and
'Stopping vehicle and ending brake
control'.
OTM070141N
Collision Warning
• To warn the driver of an approaching
vehicle from the rear left/right side of
your vehicle, the warning light on the
outside rearview mirror will blink and
a warning will appear on the cluster.
At the same time, an audible warning
will sound. If Rear View Monitor is
operating, a warning will also appear
on the infotainment system screen.
OHY059034 OTM070168
OTM070076