Hyundai Santa Fe 2022 Owner's Manual page 474

BLIND-SPOT VIEW MONITOR (BVM) (IF EQUIPPED)
„ Left side
„
OTMPH071009N
Blind-Spot View Monitor displays the
rear blind spot area of the vehicle in the
cluster when the turn signal is turned on
to help change lanes.
Detecting sensor
[1], [2] : SVM-side view camera
(camera located at bottom of the mirror)
Refer to the picture above for the
detailed location of the detecting
sensors.
„ Right side
„
OTMPH071010N
OTMPH071001N
Blind-Spot View Monitor
Settings
Setting functions for the system
Blind-Spot View
With the engine on, select 'Driver
Assistance → Blind-Spot Safety → Blind-
spot view' from the Settings menu to
turn on Blind-Spot View Monitor and
deselect to turn off the system.
Blind-Spot View Monitor
Operation
Operating switch
Turn signal switch
Blind-Spot View Monitor will turn on and
off when the turn signal is turned on and
off.
07
OIG046417
7-63