Hyundai Santa Fe 2022 Owner's Manual page 430

Stopping vehicle and ending brake control
• When the vehicle is stopped due
to emergency braking, the 'Drive
carefully' warning message will
appear on the cluster.
For your safety, the driver should
depress the brake pedal immediately
and check the surroundings.
• Brake control will end after the vehicle
is stopped by emergency braking for
approximately 2 seconds.
Junction Turning function
Warning and control
Junction Turning function will help warn
and control the vehicle depending on
the collision level: 'Collision Warning',
'Emergency Braking' and 'Stopping
vehicle and ending brake control'
OTM070059L
Collision Warning
• To warn the driver of a collision, the
'Collision Warning' warning message
will appear on the cluster and an
audible warning will sound.
• The function will operate when
your vehicle speed is between
approximately 6~19 mph (10~30 km/h)
and the oncoming vehicle speed is
between approximately 10~44 mph
(30~70 km/h).
• If 'Active assist' is selected, braking
may be assisted.
07
OTMH070015N
7-19