Dimensions; Network Security; General Safety Instructions - Honeywell Spyder 7 Installation Instructions Manual

SPYDER MODEL 7 VAV CONTROLLER INSTALLATION INSTRUCTIONS

Dimensions

2 1/2"
(66 mm)
All dimensions shown are in "(mm).

NETWORK SECURITY

WARNING
Honeywell hereby expressly states that the
Spyder™ Model 7 VAV controllers are not
inherently protected against all cyber security
risks from the Internet and are thus intended
solely for use in private or protected networks.
Unprotected Internet connections can expose the
Spyder Model 7 VAV controller to cyber security risks.
To ensure a safe and reliable operation, take necessary
protective measures, such as locating BMS controls
behind a firewall and using a VPN connection for
remote maintenance. Numerous third-party
manufacturers offer suitable VPN routers.
GENERAL SAFETY
INSTRUCTIONS
Follow the safety instructions provided by Honeywell in
this manual while doing any operation such installation,
mounting, or starting.
31-00475-01
7"
(175 mm)
5 3/4"
(147 mm)
4 3/4"
(124 mm)
Fig. 2 Spyder Model 7 VAV Dimensions
• The Spyder™ Model 7 VAV controllers must be
• In the case of any modification, except by Honeywell,
• Observe all applicable local standards and
• Use only Honeywell supplied or approved
• Before installing or dismantling the system,
4
7 1/4"
(187 mm)
7 3/4"
(197 mm)
installed and mounted by authorized and trained
personnel.
the operation and safety warranties become void.
regulations.
accessories.
disconnect the power supply by either removing the
power terminal block from the controller or through
local isolation.
CAUTION
CAUTION
You must disconnect the power before installing,
removing, or replacing the Spyder Model 7.
Switch off the power before you install any
jumpers.
2"
(52 mm)
3 1/2"
(89 mm)
3 1/2"
(91 mm)