Siemens SIMATIC RTU3041C Manual page 64

2 Engineering
15. Set the following settings for the analog input "gpsLatitude (GPS0)":
–
Transmission method: (Event (only current values))
–
Trigger: Change
–
Transfer mode: Buffered transfer
16. Set the following settings for the analog input "gpsLongitude (GPS1)":
–
Transmission method: (Event (only current values))
–
Trigger: Change
–
Transfer mode: Buffered transfer
17. Set the following settings for the counter input "visibleSatellites (GPS3)":
–
Transmission method: (Event (only current values))
–
Trigger: Change
–
Transfer mode: Buffered transfer
18. Set the following settings for the counter input "timeLastPosition (GPS4)":
–
Transmission method: (Event (only current values))
–
Trigger: Change
–
Transfer mode: Buffered transfer
19. Then click "Apply".
Securely Connecting RTU3041C to TeleControl Server Basic
Entry ID: 109739240, V3.0, 07/2021
64