Siemens SIMATIC RTU3041C Manual page 11

2 Engineering
The following table provides an overview of all IP addresses used in this example.
Assignment of static IP addresses is assumed.
Table 2-1
Component
PG/PC "TCSB"
Engineering PG/PC
PG/PC "Client"
RTU3041C
SINEMA Remote
Connect Server
SINEMA Remote
Connect Clients
Note If you have configured several interface cards on your PC or server (e.g., PG/PC
"TCSB"), and you cannot configure a default gateway for the TCSB, add a static
route to the Windows routing table.
1. Start Command Prompt (Desktop app) as administrator.
2. For example, enter the following command:
Route add 172.30.0.0 MASK 255.255.0.0 192.168.2.10
3. Press enter.
Result:
172.30.0.0: Target subnet (VPNs defined IP range)
192.168.2.10: SINEMA RC Server (LAN)
Securely Connecting RTU3041C to TeleControl Server Basic
Entry ID: 109739240, V3.0,
IP address
192.168.2.11
WAN (X1)
172.16.1.50
LAN (X2)
192.168.2.10
192.168.5.12
192.168.0.3 →
192.168.2.3
172.116.1.60
172.30.0.1-
172.30.255.254
07/2021
Subnet mask Description
255.255.255.0 TeleControl Server
Basic
255.255.0.0 SINEMA Remote
Connect Server
255.255.255.0
255.255.255.0 SINEMA Remote
Connect Client
OPC UA Client
255.255.255.0 Access to WBM
255.255.0.0 WAN IP address
255.255.0.0 Virtual IP
addresses (defined
IP range)
11