Toshiba nv Series Instruction Manual page 81

4.4 DeviceNet network setting
Enter the path name and select the USB-Device connecting DN912 and PC. (The USB-Device display name
may differ from the figure below depending on your PC.)
Figure 4-27 Selecting USB device
Then, the following message is displayed. Click Ok.
Figure 4-28 Device setting completed
The pop-up for setting the baud rate and DeviceNet MAC ID will be displayed. Select the value according to
your DeviceNet system. After selecting, click [Go Online] to connect to DN912.
Figure 4-29 Baud rate / MAC ID selection
65
Unified Controller nv Series DeviceNet Module DN912 Instruction Manual