Toshiba nv Series Instruction Manual page 6

Safety Prec autions for D ail y Us es
Do not touch the module or unit
terminals while power is on.
Failure to do so may cause electric
shock.
Do not modify, repair, disassemble
or adjust equipment, modules or
boards.
Failure to do so might cause electric
shock, fire, injury or fault.
In case of malfunction or failure, contact
our service representative.
Check that
capacity, frequency, voltage, and
fluctuation rate conform to the
specifications of the equipment
before use.
If failure to do so, not only the
original performance of the device
will not obtained, but also the device
may be damaged or overheating
which can cause a fire.
Perform
program change, forced output,
RUN and HALT during operation
after confirming sufficient safety.
Wrong operation or neglect of safety
check may cause an accident or
damage to the machine.
Turn off the power if smoke or
strange odor is emitted.
Failure to do so may cause fire or
electric shock.
Contact our branches or service
agent.
iv
6F8C1877
the power supply
operations such as
Do not use if the
temperature or internal temperature
of the device rises abnormally or the
device fails.
If used in that circumstance, overheating
may cause a fire. Switch off the device
and contact your nearest service station.
Do not forcibly bend, pull or twist the
power cord or cable.
Failure to do so may
disconnection or overheating.
Do not insert metal or drop clips from
the gaps into device.
It may cause a fire.
Turn off the power if smoke or
strange odor is emitted.
Failure to do so may cause fire or
electric shock. Contact our branches or
service agent.
ambient
cause