About The Asa - Cisco Firepower 1010 Getting Started Manual

About the ASA

•
About the ASA
The ASA provides advanced stateful firewall and VPN concentrator functionality in one device.
You can manage the ASA using one of the following managers:
• ASDM (covered in this guide)—A single device manager included on the device.
• CLI
• CDOf—A simplified, cloud-based multi-device manager
• Cisco Security Manager—A multi-device manager on a separate server.
You can also access the FXOS CLI for troubleshooting purposes.
Unsupported Features
General ASA Unsupported Features
The following ASA features are not supported on the Firepower 1010:
• Multiple context mode
• Active/Active failover
• Redundant interfaces
• Clustering
• ASA REST API
• ASA FirePOWER module
• Botnet Traffic Filter
• The following inspections:
VLAN Interface and Switch Port Unsupported Features
VLAN interfaces and switch ports do not support:
• Dynamic routing
• Multicast routing
• Policy based routing
• Equal-Cost Multi-Path routing (ECMP)
Cisco Firepower 1010 Getting Started Guide
168
What's Next?, on page 186
• SCTP inspection maps (SCTP stateful inspection using ACLs is supported)
• Diameter
• GTP/GPRS
ASA Deployment with ASDM