Removing The Belt Cover At The Centre Of The Machine - Stiga PARK 120 2016 Workshop Manual

Edition Workshop Manual
2016 PARK 120 - PARK 220
Removal of the front cover
A (6x)
To reassemble the various parts, repeat the operations in reverse order.
2.1.4

Removing the belt cover at the centre of the machine

F (2x)
To reassemble the various parts, repeat the operations in reverse order.
B
1. Loosen the six screws (A-Torx T30) that hold
the covers (B-C) in place.
C
B
C
A
1. Remove the engine cover; for details
2.1.1
D
2. Remove the spring (A) to tension arm from the
frame.
3. Unscrew the bolt (B) (13 mm wrench).
4. Remove the tension arm (C).
5. Remove the belt (D) from the pulley.
6. Disassemble the lower belt cover, two screws
(E-Torx wrench T30 + 10mm wrench).
7. Disassemble the upper belt cover, two screwsi
(F).
E (2x)
Chapter
2 Frame and Covers
Page
20