Toshiba B-FV4D-GL Series Owner's Manual page 4

Safety Precautions
Disconnect
the plug.
Connect a
grounding wire.
Prohibited
CAUTION
Precautions
The following precautions will help to ensure that this machine will continue to function correctly.

Try to avoid locations that have the following adverse conditions:
* Temperatures out of the specification
* Shared power source

The cover should be cleaned by wiping with a dry cloth or a cloth slightly dampened with a mild detergent solution. NEVER USE
THINNER OR ANY OTHER VOLATILE SOLVENT on the plastic covers.

USE ONLY TOSHIBA TEC CORPORATION SPECIFIED paper and ribbons.

DO NOT STORE the paper or ribbons where they might be exposed to direct sunlight, high temperatures, high humidity, dust, or
gas.

Ensure the printer is operated on a level surface.

Any data stored in the memory of the printer could be lost during a printer fault.

Try to avoid using this equipment on the same power supply as high voltage equipment or equipment likely to cause mains
interference.

Unplug the machine whenever you are working inside it or cleaning it.

Keep your work environment static free.

Do not place heavy objects on top of the machine, as these items may become unbalanced and fall causing injury.

Do not block the ventilation slits of the machine, as this will cause heat to build up inside the machine and may cause fire.

Do not lean against the machine. It may fall on you and could cause injury.

Unplug the machine when it is not used for a long period of time.

Place the machine on a stable and level surface.

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES
ACCORDING TO THE INSTRUCTIONS.
Request Regarding Maintenance

Utilize our maintenance services.
After purchasing the machine, contact your authorised TOSHIBA TEC CORPORATION representative for assistance once a year
to have the inside of the machine cleaned. Dust will build up inside the machine and may cause a fire or a malfunction. Cleaning is
particularly effective before humid rainy seasons.

Our preventive maintenance service performs periodic checks and other work required to maintain the quality and performance of
the machine, preventing accidents beforehand.
For details, please consult your authorised TOSHIBA TEC CORPORATION representative.

Using insecticides and other chemicals
Do not expose the machine to insecticides or other volatile solvents. This will cause the cabinet or other parts to deteriorate and
may cause the paint to peel.
If foreign objects (metal fragments,
water, liquids) enter the machine,
turn off the power switch and
disconnect the power cord plug
from the outlet, and then contact
your authorised TOSHIBA TEC
CORPORATION representative
for assistance. Continued use of
the machine in that condition may
cause fire or electric shock.
Ensure that the equipment is
properly grounded. Extension
cables should also be grounded.
Fire or electric shock could occur
on improperly grounded
equipment.
Do not use a spray cleaner
containing flammable gas for
cleaning this product, as this may
cause a fire.
This indicates that there is the risk of personal Injury or damage to objects if the
machine is improperly handled contrary to this indication.
Disconnect
the plug.
No
disassembling.
Prohibited
* Direct sunlight
* Excessive vibration
( ii )
ENGLISH VERSION
When unplugging the power cords, be
sure to hold and pull on the plug.
Pulling on the cord may cut or expose
the internal wires and cause fire or
electric shock.
Do not remove covers, repair or
modify the machine by yourself.
Contact your authorised TOSHIBA
TEC CORPORATION representative
for assistance. You may be injured by
high voltage, very hot parts or sharp
edges inside the machine.
Care must be taken not to injure
yourself with the printer paper cutter.
* High humidity
* Dust/Gas