Toshiba B-FV4D-GL Series Owner's Manual page 28

3. MAINTENANCE
3.1.5 Cutter (Cont.)
CAUTION!
When closing the Paper
Guide, be careful not to drop
metal or other foreign
objects, such as a paper clip
into the guide, as this may
cause a malfunction of the
printer.
CAUTION!
Make sure the Cutter Block
is re-attached correctly.
Failure to do this may cause
problems with printing or
cutting.
ENGLISH VERSION EO1-33099
9. Close the Paper Guide, and return two levers to the original positions.
10. Push the Cutter Harness into the printer before re-attaching the Cutter
Block.
11. Fit the Cutter Block on the front side of the printer in position.
Confirm the two lower hooks and two upper hooks on both sides of
the Cutter Block are inserted into the slits with reference to the
Arrow Marks. After fitting the Cutter Block, attach the Cutter Tray
to the Cutter Block.
Arrow Marks
E3- 5
Cutter Harness
Lower Hooks
Cutter Tray
3.1 Cleaning