Table of Contents
Advertisement
APPENDIX 1 SPECIFICATIONS
A1.2.2 Effective Print Area
The figure below illustrates the relation between the effective print width and label width.
Out of print range 1.5mm
The figure below shows the effective print area on the media.
1.5mm from the left edge of media
NOTES:
1. Be sure not to print on the 1.5-mm wide area from the label edges (shaded area in the above figure).
2. The centre of media should be positioned at the centre of the print head.
3. Print quality is not guaranteed within 3 mm from the print head stop position (including 1-mm slow-up.)
4. Average print (black) rate should be 15% or less. For barcode print area, the print rate should be 30% or less.
5. Line weight should be 3 to 12 dots.
ENGLISH VERSION EO1-33099
Print head element
(Effective Print Range)
102.0 mm (Max. label width)
Start line
1mm
Effective print area
1mm
99.0 mm
Media width
EA1-
3
Out of print range 1.5mm
1.5mm from the right edge of media
Media feed direction
A1.2 Media
Advertisement
Table of Contents
