Sherwood Newcastle R-871 Operating Instructions Manual page 58

Continued
To check the results, press the ENTER button.
6
When selecting the SPEAKER CONFIGURATION
Press the CURSOR UP(▲)/DOWN(▼) buttons to select the SPEAKER CONFIGURATION,
1
then press the ENTER button.
Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired speaker.
2
• Then the results are memorized and the
SPEAKER/ROOM EQ SETUP menu is displayed.
• Check the results on each setup menu(SPEKER
CONFIGURATION menu below, SPEAKER
DISTANCE menu on page 59, SPEAKER
CROSSOVER menu on page 60 and CH LEVEL
SETUP menu for "CALIBRATE" mode on page 62).
• If the results are not satisfactory, you can retry the
auto setup procedure or personalize your speaker
setup and channel level setup by making the
settings manually. (For details, refer to "When
selecting the SPEAKER CONFIGURATION" below,
"When selecting the SPEAKER DISTANCE" on
page 59, "When selecting the SPEAKER
CROSSOVER" on page 60, "Adjusting each
channel level with test tone" on page 35 and
"Adjusting the current channel level" on page 36.)
57