Advertisement
Log, Stone, and Crushed Glass Placement
Overview - 4415 HO ST:
(a)
(d)
#13 Stone
Log and Stone Installation Details
The logs are fragile, especially after being exposed to heat.
You may wish to measure out the amount of crushed glass needed for the installation (see the
final page of this instruction sheet) and place one layer of crushed glass on the rear of the glass
support and burner. Placing the glass at the rear is easiest at this step of log installation. Do not
place glass on the left back corner (this is where the arched log is placed.
Place log (b) on the media tray as shown below. Note that the branch on the log is on the left side. The posts on
the log supports insert into the holes on the bottom of the log.
Page 3 of 12
4415 HO ST - Driftwood Log Set
Installation Instructions
#32 Stone
17602107
— 12/12/19
(SKU 94500976)
(b)
(e)
#10 Stone
(c)
(f)
#35 Stone
© Travis Industries, Inc.
Advertisement
