Schwinn 420 Assembly Manual page 13

Step 6: Install Lower Arms
Parts
• Main Unit (from Step 5)
• #7 - Arm Pivot Rod (Qty. 1)
• #8 - Lower Left Arm (Qty. 1)
• #11 - Lower Right Arm (Qty. 1)
Hardware
• #25 - M8 Lock Washer (Qty. 2)
• #28 - M8 Wide Washer (Qty. 2)
• #31 - M8x20 Hex Head Bolt (Qty. 2)
8
Assembly
Do steps 6-1 and 6-2 on one side and then again
on the other side.
6-1 Move the Arm Pivot Rod through the Console Mast as
shown.
6-2 Connect the Lower Right Arm to the Arm Pivot Rod with
the hardware shown. Do not tighten.
13
Assembly Manual
7
28
25
31
11