Assembly - Schwinn 420 Assembly Manual

Step 1: Install Rear Stabilizer and Transport Handle
Parts
• #5 - Rear Stabilizer (Qty. 1)
• #17 - Running Rail (Qty. 2)
• #18 - Transport Handle (Qty. 1)
• #22 - Threaded Foot Pad (Qty. 2)
• #23 - Foot Adjust Nut (Qty. 2)
Hardware
• #24 - M8 Flat Washer (Qty. 8)
• #25 - M8 Lock Washer (Qty. 8)
• #29 - M8x15 Hex Screw (Qty. 8)
Tools
• Hex Key
23
22

Assembly

17
18
1-1 Attach two Running Rails to Rear Stabilizer with the
hardware shown. Do not tighten.
1-2 Attach the Transport Handle to each Running Rail with 2
Foot Adjust Nuts and 2 Foot Pads.
1-3 Fully tighten all hardware.
8
Assembly Manual
5
29
24
25