Table of Contents
Advertisement
1/4" Color CCD High-resolution Weatherproof
Zoom Camera
VCC-XZ200P
2.6x
Optical Zoom
Minimum
Multi-spot /
520
illumination
Center-zone
0.06
TV Lines
lx
SSP
24V AC
Electronic
Network
12V to
shutter
15V DC
(Option)
Adjustable Arm
The angle of the arm is adjustable
in all directions. Since the flexible
joint is secured by screws, the
arm maintains its position without
sagging over time. In addition, a
safety wire is included to prevent
accidents. Installation on a ceiling
or wall is easy without any
additional parts. The wires are
securely protected inside the arm.
Intelligent switching from Color to B/W
Selecting Color or B/W mode can be done automatically by
the camera, or else manually. In addition, the user is allowed
to change the switchover point from 1 to 10 lx (nominal) using
the on-screen menu. The integration of Color and high
sensitivity B/W modes in one camera makes it a versatile tool
for any surveillance need. It is truly an all-in-one camera.
Flexible Motion Detector
The Flexible Motion Detector enables reliable and accurate
motion detection by analyzing the magnitude of movement
and the size of object from changes in picture brightness.
When a moving object is detected, VCC-XZ200P can send an
alarm signal* to external units and/or switch to the optical
zoom mode that can be preset either to 1.0x, 1.4x, 2.0x, or
2.6x zoom.
*Only when using VA-20LAN or VA-20ST board option
Privacy Masking
When there is a house or even an object as small as a
window within the camera frame, it is possible to mask the
area so that it will not appear on the
monitor screen to protect other people's
privacy. Up to 4 rectangular masks of
arbitrary size can be set per screen.
These masking areas may be protected
with a 4-digit (max.) password.
Easy Setup with an On-screen Menu
The VCC-XZ200P offers an on-screen menu for setting up the
camera any desired way.
Other features
• Display of assignable camera ID and title (16 characters max.)
ATW
Internal sync.
AWC
BLC
Manual
Line lock
Zoom
IP66
Pan-focus
auto iris lens
Integrated flexible arm
Weatherproof Day/Night Zoom Camera
VAC-70
Camera Control Unit
(sold separately)
See page 33 for details.
VCC-XZ200P
With Sunshade
123
74.6
28.8
110
141
Without Sunshade
74.6
28.8
110
141
MODEL
VCC-XZ200P
Scanning system
PAL standard 625 lines, 50 fields/sec.
Image sensor
1/4" Interline transfer method CCD (3.6 x 2.7 mm)
Number of pixels
Total: 795 (H) x 596 (V), Effective: 752 (H) x 582 (V)
Horizontal resolution
More than 520 TV lines
50IRE
Minimum
1.2 lx (F1.9, Gain High, Color mode) /
illumination
0.06 lx (F1.9, Gain High, B/W mode)
20IRE
(approx.)
0.48 lx (F1.9, Gain High, Color mode) /
0.024 lx (F1.9, Gain High, B/W mode)
Video output
1.0 V (p-p) (75 Ω, composite)
Video S/N ratio
More than 50 dB (AGC OFF)
Backlight compensation
ON (Multi-spot photometry [High/Normal],
Center-zone photometry) / OFF
White balance
ATW / AWC / Manual (MWB) / Outdoor (3200) /
Indoor (5600) / Fluorescent (FLUO)
Gain control
High / Normal / Off
Gamma
0.45 / 1
Lens
Built-in motorized zoom pan-focus auto iris lens,
f=2.8 to 7.3 mm (2.6x), F1.9 to 3.0
Electronic shutter
1/50, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 sec.
Motion detector
On / Off: Motion zoom function
Privacy masking
On / Off: Max. 4 masked locations
Alarm input
1 (NO / NC), with alarm zoom function
Character display
On / Off, Camera ID max. 16 characters, adjusting position
Synchronizing system
Internal sync. / Line lock
Day/Night mode
Auto (High/Low) / Color / B/W: External control
Aperture compensation
High plus / High / Normal / Off
Operating
Environmental
Temperature: –10°C to +50°C (+14°F to +122°F),
conditions
Humidity: within 90% RH
Storage
Temperature: –20°C to +70°C (–4°F to +158°F),
Humidity: within 70% RH
Power supply
24 V AC ±10%, 50 Hz or 12 V to 15 V DC
Power consumption
3.5 W (without options), 6.0 W (with options),
(approx.)
13.0 W (with heater)
AC Adaptor
Not included
Dimensions (Dia. x H)
141(W) x 181.9(H) x 379.6(D) mm [5.55(W) x 71.61(H) x 149.45(D) in.]
Weight (approx.)
1.56 kg [55.0 oz.] (without sunshade)
1.76 kg [62.1 oz.] (with sunshade)
VA-20LAN
Network board
This expansion board for network connection enables SANYO color
CCD cameras to connect to a network. The user can operate a
network connected camera using a web browser (Internet Explorer).
It comes with the VA-SW3050LITE viewer software.
SSP+Twisted pair board
Coaxial control : SSP / H-SSP / PELCO-C
RS-485: SSP / PELCO-D
Twisted pair terminal (CAT5) for video signal:
NOTE: The VA-20LAN and the VA-20ST cannot be used concurrently.
Heater board VA-50H
The heater board protects the camera from cold weather.
It allows the camera to operate at temperatures as low
as -30°C. (24 V AC only)
379.6
224.3
360.6
21.2
191.4
(Unit: mm)
NOTE: Specifications subject to change without notice
(sold separately)
VA-20ST
(sold separately)
NVT built-in UTP video
(sold separately)
18
Advertisement
Table of Contents
